Year 10 AQA GCSE Physics: How AQA Links the Topics and Divides the Marks

Cross-references between topics, marks by topic on the June 2025 papers and the ten required practicals for AQA 8463

Book a Free Consultation

Year 10 AQA GCSE Physics (8463) is the first year of a linear, two-year qualification assessed on two papers, each 1 hour 45 minutes, 100 marks and 50% of the GCSE. AQA’s mark schemes attach every question part to a specification reference, so the marks on each tier’s papers can be counted by topic. We counted the June 2025 papers below.

AQA’s scheme of assessment says the specification “is designed to be taken over two years”, and its specification at a glance gives Paper 1 as Topics 1 to 4 and Paper 2 as Topics 5 to 8. Our AQA GCSE Physics (8463) guide covers the specification overview. Our Year 11 AQA GCSE Physics page reads the examiners’ reports on the same papers.

GCSE physics tuition for Year 10

Book a free consultation to talk through Year 10 AQA GCSE Physics tuition, at Foundation or Higher Tier.

Book a Free Consultation Message us on WhatsApp

Which topics does AQA say the later ones draw on?

The specification at a glance names the topics in each paper: Energy, Electricity, Particle model of matter and Atomic structure for Paper 1, and Forces, Waves, Magnetism and electromagnetism and Space physics for Paper 2. Under Paper 2 it adds that questions “may draw on an understanding of energy changes and transfers due to heating, mechanical and electrical work and the concept of energy conservation from Energy and Electricity”. Energy and Electricity are Topics 1 and 2, so AQA’s own wording ties the first two topics of the specification to the second paper.

The specification text and AQA’s Energy scheme of work point between topics in several more places. The table quotes each one exactly. These are AQA’s links between topics as it words them, and we draw no teaching order from them: AQA describes its schemes of work as “a flexible medium term plan” that teachers can edit.

Where it appearsAQA’s wordsSection it points to
Specification, 4.1.1.1 Energy stores and systems“The link between work done (energy transfer) and current flow in a circuit is covered in Energy transfers (page 29).”4.2.4 Energy transfers, in Topic 2 (Electricity)
Specification, 4.3.2.2 Temperature changes in a system and specific heat capacity“This equation and specific heat capacity are also included in Energy changes in systems (page 19).”4.1.1.3 Energy changes in systems, in Topic 1 (Energy)
Specification, 4.2.4.3 The National Grid“The construction and operation of transformers is covered Transformers (HT only) (page 72).”4.7.3.4 Transformers (HT only), in Topic 7 (Magnetism and electromagnetism)
Energy scheme of work, row 4.1.1.1“The equations are covered in detail in sections 4.2.4, and 4.5.2.”4.2.4 Energy transfers (Topic 2) and 4.5.2 Work done and energy transfer (Topic 5)
Energy scheme of work, row 4.1.1.3“The equation is covered in detail in section 4.3.2”4.3.2 Internal energy and energy transfers (Topic 3)
Energy scheme of work, row 4.1.1.3, beside the specific heat capacity required practical“This may be better completed after section 4.2.4 when all of the preliminary work has been completed.”4.2.4 Energy transfers (Topic 2)
Energy scheme of work, row 4.1.1.4 Power“To introduce the equation for work done by a force section 4.5.2 needs to be covered.”4.5.2 Work done and energy transfer (Topic 5)
Atomic structure scheme of work, nuclear fusion row“Link to 8.1.2 on Nuclear fusion in stars.”8.1.2, as AQA writes the reference, in the Space physics material (Topic 8)

Two readings follow from the table, and both stay within what AQA wrote. First, the Energy scheme of work’s rows lead to Topics 2, 3 and 5, and the specification’s Particle model row leads back to Energy. Second, Electricity appears on both sides of the links: Energy rows point to it, and AQA names it, with Energy, as material Paper 2 questions may draw on.

AQA GCSE physics tuition in Year 10

Book a free consultation to talk through Year 10 AQA GCSE Physics tuition, from the first topics to the written papers.

Book a Free Consultation Message us on WhatsApp

Which topics carried the marks on AQA’s latest published papers?

AQA publishes the question papers and mark schemes for all four June 2025 papers: 8463/1F, 8463/1H, 8463/2F and 8463/2H. The mark scheme has an “AO / Spec. Ref.” column against each question part, and the question paper prints the marks for each part as [n marks]. Reading the two together gives the marks that each specification topic carried on that paper. The result is our count, not an AQA statement.

The rule we used

We took the marks for each question part from the question paper, in order, and paired them with the mark scheme row for the same part. The counts agree on every paper: 58 parts on 8463/1F, 39 on 8463/1H, 58 on 8463/2F and 41 on 8463/2H, and the marks on each paper add to 100. We then read the specification references in the AO / Spec. Ref. column. A part whose references all sit under one topic is counted under that topic. A part whose references sit under two or more topics is counted in the row labelled More than one topic and is listed separately in the second table, so no mark is counted twice in the first table. Foundation and Higher are kept apart because they are separate papers. This is one series and a count of what AQA printed, not a prediction of any later paper.

Topic (specification number)Paper 1 Foundation (8463/1F)Paper 1 Higher (8463/1H)Paper 2 Foundation (8463/2F)Paper 2 Higher (8463/2H)
1 Energy (4.1)393300
2 Electricity (4.2)202100
3 Particle model of matter (4.3)141500
4 Atomic structure (4.4)111600
5 Forces (4.5)005656
6 Waves (4.6)002913
7 Magnetism and electromagnetism (4.7)00718
8 Space physics (4.8)0086
More than one topic161507
Total marks on the paper100100100100

Working for one column: 8463/1F is 39 + 20 + 14 + 11 + 16 = 100. The other three add the same way: 33 + 21 + 15 + 16 + 15 = 100 for 8463/1H, 56 + 29 + 7 + 8 + 0 = 100 for 8463/2F and 56 + 13 + 18 + 6 + 7 = 100 for 8463/2H. In our count the 0 under 8463/2F in the More than one topic row means no 8463/2F part listed references from two topics.

Three points can be read straight off the table. Forces carries 56 of the 100 marks on both Paper 2 papers, Foundation and Higher. On Paper 1, Energy carries 39 marks on the Foundation paper and 33 on the Higher paper. And Space physics, which AQA marks as physics only, carries 8 marks on 8463/2F and 6 on 8463/2H.

The question parts differ in size between tiers. As our calculation, 100 marks over 58 parts is 1.72 marks per part on 8463/1F and on 8463/2F, against 100 over 39 parts, or 2.56, on 8463/1H and 100 over 41 parts, or 2.44, on 8463/2H. The Higher papers have fewer, larger parts for the same 100 marks.

The parts that cite two topics

The second table lists every part in the More than one topic row, with the marks from the question paper and the references exactly as the mark scheme lists them.

PaperQuestion partMarksReferences the mark scheme lists
8463/1F02.324.1.1.3, 4.3.2.2
8463/1F02.414.2.4.2, 4.1.1.4
8463/1F02.534.2.4.2, 4.1.1.4
8463/1F09.114.1.1.3, 4.3.2.2
8463/1F09.264.1.1.3, 4.3.2.2
8463/1F09.314.1.1.3, 4.3.2.2
8463/1F09.424.1.1.3, 4.3.2.2
8463/1H02.114.1.1.3, 4.3.2.2
8463/1H02.264.1.1.3, 4.3.2.2
8463/1H02.314.1.1.3, 4.3.2.2
8463/1H02.424.1.1.3, 4.3.2.2
8463/1H05.324.1.1.3, 4.3.2.2, 4.3.2.3
8463/1H06.134.3.2.2, 4.1.1.3
8463/2H06.354.5.2, 4.1.1.2, 4.5.6.2.2, 4.5.6.1.5, 4.5.7.3
8463/2H07.424.5.1.4, 4.7.2.3

Working: the 8463/1F marks are 2 + 1 + 3 + 1 + 6 + 1 + 2 = 16 across 7 parts, the 8463/1H marks are 1 + 6 + 1 + 2 + 2 + 3 = 15 across 6 parts, and the 8463/2H marks are 5 + 2 = 7 across 2 parts.

All 13 two-topic parts on the Paper 1 papers pair a Topic 1 reference with a Topic 2 or Topic 3 reference. Eleven of them pair 4.1.1.3 (Energy changes in systems) with 4.3.2.2 (Temperature changes in a system and specific heat capacity), with 8463/1H part 05.3 also listing 4.3.2.3, and the other two, 8463/1F 02.4 and 02.5, pair 4.2.4.2 (Energy transfers in everyday appliances) with 4.1.1.4 (Power). The 4.1.1.3 and 4.3.2.2 pairing is the one the specification cross-refers in the first table. On Paper 2, 8463/2H part 06.3 is a five-mark part whose references include 4.1.1.2 (Changes in energy) beside four Forces references; in our count it is the one Paper 2 part with a Topic 1 reference. Which students lost marks on parts like these is a question for the examiners’ reports, which our Year 11 page reads.

Year 10 physics tuition for Foundation and Higher

Book a free consultation to talk through Year 10 AQA GCSE Physics tuition and the tier your student is working towards.

Book a Free Consultation Message us on WhatsApp

What does AQA list under each topic heading?

Each of the eight topics is split into numbered subsections in the specification. The table gives the headings of the form 4.x.y exactly as AQA words them, so a student can see what sits inside Topics 1 to 4, which AQA assesses on Paper 1, and Topics 5 to 8, which it assesses on Paper 2.

TopicSubsection headings in the specificationHeadings
1 Energy4.1.1 Energy changes in a system, and the ways energy is stored before and after such changes; 4.1.2 Conservation and dissipation of energy; 4.1.3 National and global energy resources3
2 Electricity4.2.1 Current, potential difference and resistance; 4.2.2 Series and parallel circuits; 4.2.3 Domestic uses and safety; 4.2.4 Energy transfers; 4.2.5 Static electricity (physics only)5
3 Particle model of matter4.3.1 Changes of state and the particle model; 4.3.2 Internal energy and energy transfers; 4.3.3 Particle model and pressure3
4 Atomic structure4.4.1 Atoms and isotopes; 4.4.2 Atoms and nuclear radiation; 4.4.3 Hazards and uses of radioactive emissions and of background radiation (physics only); 4.4.4 Nuclear fission and fusion (physics only)4
5 Forces4.5.1 Forces and their interactions; 4.5.2 Work done and energy transfer; 4.5.3 Forces and elasticity; 4.5.4 Moments, levers and gears (physics only); 4.5.5 Pressure and pressure differences in fluids (physics only); 4.5.6 Forces and motion; 4.5.7 Momentum (HT only)7
6 Waves4.6.1 Waves in air, fluids and solids; 4.6.2 Electromagnetic waves; 4.6.3 Black body radiation (physics only)3
7 Magnetism and electromagnetism4.7.1 Permanent and induced magnetism, magnetic forces and fields; 4.7.2 The motor effect; 4.7.3 Induced potential, transformers and the National Grid (physics only) (HT only)3
8 Space physics (physics only)4.8.1 Solar system; stability of orbital motions; satellites (physics only); 4.8.2 Red-shift (physics only)2

Our count of the table is 3 + 5 + 3 + 4 + 7 + 3 + 3 + 2 = 30 headings, and 9 of them carry (physics only): 4.2.5, 4.4.3, 4.4.4, 4.5.4, 4.5.5, 4.6.3, 4.7.3, 4.8.1 and 4.8.2. The specification says most of its content “is co-teachable with GCSE Combined Science: Trilogy”, and marks content that is only for physics with (physics only), either beside a topic heading or before a paragraph or bullet point.

The Higher Tier marker works the same way. Counting numbered headings that carry (HT only), we find 13: 4.3.3.3 in Topic 3; 4.5.5.1.2 and 4.5.7 in Topic 5; 4.6.1.4 and 4.6.1.5 in Topic 6; and eight in Topic 7, which are 4.7.2.2, 4.7.2.3, 4.7.2.4, 4.7.3 and 4.7.3.1 to 4.7.3.4. That is a count of headings only, because the specification also places (HT only) before individual paragraphs and bullet points.

What Parents Say

DP

Deborah Prior

★★★★★
Confidence and progress

My son was low in confidence after COVID and the gaps in learning were building up. Using this service helped plug those gaps, rebuild confidence, and improve his ability to learn properly again.

NI

Nicola

★★★★★
Amazing tutors!

We arranged maths and English tuition ahead of GCSEs and both tutors were brilliant. My daughter's grades improved, and by results day she achieved two grades higher than in her mock exams.

S

Saifan Khan

★★★★★
Great Teaching and Focused Learning

I attended an English bootcamp with Leading Tuition and the experience was excellent. The teacher gave focused attention to the small group while keeping the lessons interactive and engaging.

Leading Tuition is rated 4.8 out of 5 on Trustpilot from 59 reviews, read on 3 October 2026.

91% of our students achieve their desired grades.

Where do the ten required practicals sit in the specification?

The specification lists ten required practicals, printed under the topic each one belongs to. The table sets them out in the order AQA numbers them, with the topic we read each one under.

NumberPracticalPrinted underAlso in Combined Science?
1Specific heat capacityTopic 1 EnergyYes
2Thermal insulationTopic 1 EnergyPhysics only
3Resistance of circuitsTopic 2 ElectricityYes
4I–V characteristicsTopic 2 ElectricityYes
5DensityTopic 3 Particle model of matterYes
6Force and extension of a springTopic 5 ForcesYes
7Force, mass and accelerationTopic 5 ForcesYes
8Waves in a ripple tank and in a solidTopic 6 WavesYes
9Reflection and refraction of lightTopic 6 WavesPhysics only
10Infrared radiation and surfacesTopic 6 WavesYes

Our count: practicals 1 to 5 are printed under Topics 1, 2 and 3, which are Paper 1 topics, and practicals 6 to 10 under Topics 5 and 6, which are Paper 2 topics. That is five and five. AQA states that practicals 1, 3 to 8 and 10 are common with GCSE Combined Science: Trilogy and Combined Science: Synergy, and that practicals 2 and 9 are GCSE Physics only, which makes eight common and two physics only.

AQA’s wording on how practicals are examined is plain: “Students won’t be assessed whilst conducting their practical work, but the written exam will include questions on it.” Schools and colleges also provide AQA with a written practical science statement, confirming they have taken reasonable steps to secure that each student has completed the required practical activities. The practical belongs to the course, then, and the evidence of it is in the written papers. AQA’s practical assessment page has the full text.

Year 10 AQA GCSE Physics tutoring

Book a free consultation to talk through Year 10 AQA GCSE Physics tutoring, including the required practicals.

Book a Free Consultation Message us on WhatsApp

What do the tiers and the maths requirements ask of a student?

The specification sets two tiers. A student taking Foundation Tier assessments is awarded a grade within the range 1 to 5, and a student taking Higher Tier assessments a grade within the range 4 to 9. A Higher Tier student who just fails to achieve grade 4 is awarded an allowed grade 3. The entry codes are 8463F for Foundation and 8463H for Higher. Our guides to Foundation AQA GCSE Physics and Higher AQA GCSE Physics cover each tier’s content.

AQA sets a floor for the maths in each tier. In its words, in Foundation Tier papers questions assessing maths requirements “will not be lower than that expected at Key Stage 3”, and in Higher Tier papers they “will not be lower than that of questions and tasks in assessments for the Foundation Tier in a GCSE Qualification in Mathematics”. AQA’s mathematical requirements page lists the skills, and the Foundation floor points to the Key Stage 3 maths programme of study.

How does the specification treat Key Stage 3 content and Combined Science?

Section 5.1 of the specification says: “Physics should be taught in progressively greater depth over the course of Key Stage 3 and Key Stage 4.” It adds, in its own wording, that teaching of content already covered at an earlier stage is not expected to be repeated during the GCSE course. For a Year 10 student that is AQA’s own statement of how the GCSE sits on top of earlier physics, and it is the board’s position, not ours.

The Combined Science link matters for students who meet both qualifications in school. The specification says most of its content is co-teachable with Combined Science: Trilogy, eight of the ten required practicals are shared, and the (physics only) content is flagged against 9 of the 30 subsection headings. Our AQA GCSE Combined Science guide covers that qualification, and for the wider subject, see our GCSE Physics tuition page.

Frequently Asked Questions

How many papers and marks does AQA GCSE Physics have?

AQA GCSE Physics (8463) has two papers. Paper 1 assesses Topics 1 to 4 and Paper 2 assesses Topics 5 to 8. Each is a written exam of 1 hour 45 minutes, carries 100 marks and counts for 50% of the GCSE, so the total scaled mark is 200. Foundation and Higher Tier students sit different papers (8463/1F and 8463/2F, or 8463/1H and 8463/2H), and AQA’s scheme of assessment says students complete all assessments at the end of the course and in the same series.

Which earlier topics can Paper 2 questions draw on?

AQA’s specification at a glance says Paper 2 questions “may draw on an understanding of energy changes and transfers due to heating, mechanical and electrical work and the concept of energy conservation from Energy and Electricity”. Those are Topics 1 and 2. In our count of the June 2025 mark schemes, one 8463/2H part, 06.3 (5 marks), lists a Topic 1 reference, 4.1.1.2, alongside four Forces references.

How did the marks divide across topics on AQA’s latest papers?

In our count of the June 2025 papers, Forces carried 56 of the 100 marks on both 8463/2F and 8463/2H. On Paper 1 the single-topic marks were Energy 39, Electricity 20, Particle model of matter 14 and Atomic structure 11 on 8463/1F, and 33, 21, 15 and 16 on 8463/1H, with a further 16 and 15 marks on parts that cite two topics. These counts come from the question papers and the mark schemes’ specification references and describe one series.

How many required practicals are there and how much of the exam draws on them?

AQA’s specification lists ten required practicals. Questions in the written exams draw on them and “These questions will count for at least 15% of the overall marks for the qualification.” Practicals 2 and 9 are GCSE Physics only; the other eight are common with Combined Science. AQA says students are not assessed while carrying out the practical work, but the written exam includes questions on it.

What level of maths does AQA expect in GCSE Physics?

AQA says that in Foundation Tier papers questions assessing maths requirements “will not be lower than that expected at Key Stage 3”. In Higher Tier papers they “will not be lower than that of questions and tasks in assessments for the Foundation Tier in a GCSE Qualification in Mathematics”. The specification’s mathematical requirements list the skills, in sections such as arithmetic and numerical computation (1) and handling data (2).

How much of GCSE Physics can be taught alongside Combined Science?

AQA’s specification says most of its content is co-teachable with GCSE Combined Science: Trilogy. Eight of the ten required practicals (1, 3 to 8 and 10) are common with Combined Science, and practicals 2 and 9 are physics only. By our count 9 of the 30 numbered subsection headings, such as 4.8.1 and 4.8.2 in Topic 8, carry (physics only).

Which grades can each tier award in AQA GCSE Physics?

A student taking Foundation Tier assessments is awarded a grade within the range 1 to 5, and a student taking Higher Tier assessments a grade within the range 4 to 9. A Higher Tier student who just fails to achieve grade 4 is awarded an allowed grade 3. The entry codes are 8463F for Foundation and 8463H for Higher.

Start Year 10 AQA GCSE physics tutoring

Book a free consultation to talk through Year 10 AQA GCSE Physics tuition.

Book a Free Consultation
Message us on WhatsApp