Year 10 OCR GCSE Chemistry: What OCR’s Documents Say

OCR’s sample outline, specification statements and Summer 2025 examiners’ reports for Chemistry A (J248) and Chemistry B (J258).

Book a Free Consultation

OCR runs two parallel GCSE Chemistry courses: Chemistry A (Gateway Science, J248) and Chemistry B (Twenty First Century Science, J258). In OCR’s sample two-year outline, Topics C1 to C4 of J248 and Chapters C1 to C4 of J258 sit in Year 10. The two routes give their C1 to C4 different titles and different months, and they are examined differently: J248 Papers 1 and 3 test C1 to C3 and C7, while J258’s papers can assess every chapter.

This page reads OCR’s planning workbooks, specifications and Summer 2025 examiners’ reports for the first year, with each route kept apart. Papers and tiers are on our OCR GCSE Chemistry (J248 and J258) page; the final year is on our Year 11 OCR GCSE Chemistry page.

Year 10 OCR GCSE Chemistry tuition

Book a free consultation to talk through Year 10 OCR GCSE Chemistry tuition, whether your student is on Chemistry A (J248) or Chemistry B (J258).

Book a Free Consultation Message us on WhatsApp

What Does OCR’s Sample Outline Put in Year 10, and When?

OCR publishes an annual planning workbook for each science suite, Gateway Science for J248 and Twenty First Century Science for J258, and each route’s tab is headed “Suggested teaching outline for a 2 year Key Stage 4 - three teachers in Year 10 and 11”, with the chemistry topic for each week in a Year 10 and a Year 11 column.

OCR sets out how the weeks are drawn up. Both tabs say: “Weeks are divided up in proportion to the suggested teaching hours given in the 'Curriculum Planners'.” For J248, OCR’s planning booklet says of the order in which its own table lists the topics: “It is not implied that centres teach the specification topics in the order shown. Centres are free to teach the specification in the order that suits them.” The outline below is OCR’s suggestion, and it is the only thing this section describes.

Our reading of the Year 10 column in each tab, giving the month labels (column C) of the first and last row that names each topic:

In both tabs one June row is labelled Yr10Exams, and C4 sits on the rows either side of it. The last C3 row is in May on the J248 tab and in April on the J258 tab. We give months only: the tab is one outline per route, and the weeks inside a month are OCR’s proportional split, not a timetable.

What Do OCR’s Specifications Say Learners Bring to the First Four Topics, and Get Wrong?

Both specifications state, topic by topic, what learners should be familiar with and which misconceptions they commonly hold. The two routes do it in different forms, so they are set out separately here and counted by different rules.

Chemistry A (J248): two paragraphs under every first-year sub-topic

The J248 specification lists Topics C1 to C4 as Particles, Elements, compounds and mixtures, Chemical reactions, and Predicting and identifying reactions and products. Under each sub-topic it prints a paragraph headed Underlying knowledge and understanding, which sets out what learners should be familiar with linked to that sub-topic, and a paragraph headed Common misconceptions. These are the specification’s own words, quoted here by sub-topic:

Two of these point back across the first year. The C4.2 paragraph names electrolysis, which is sub-topic C3.4 in the same specification, and the C4.1 paragraph returns to the particle model that C1.1 introduces. That pairing is our reading of the two paragraphs.

Chemistry A or Chemistry B?

Book a free consultation to talk through tuition for the route your student’s school enters, J248 or J258, in Year 10 OCR GCSE Chemistry.

Book a Free Consultation Message us on WhatsApp

Chemistry B (J258): Key Stage 1 to 3 lists before each chapter

The J258 specification opens each chapter with a section headed “Learning about air and water before GCSE (9–1)” (the title changes with the chapter) and the line “From study at Key Stages 1 to 3 learners should:” followed by bullet items. OCR says of these ideas that “while this material need not be retaught, it can be drawn upon to develop ideas at GCSE (9–1).”

One item recurs. In each of the four first-year chapters, a bullet in the list is about atoms, elements and compounds: C1 has “appreciate the differences between atoms, elements and compounds”, C2 has “know differences between atoms, elements and compounds”, and C3 and C4 each have “know the differences between atoms, elements and compounds”.

Our count, and the rule. For J248 we counted, in the specification text for each of Topics C1 to C4, the sub-topic headings and the paragraphs under each of the two headings. For J258 we counted, for each chapter, the bullet items in the Key Stage 1 to 3 list, from the line quoted above to the Tiering note that follows it. The table gives both, one route per row group.

Route and OCR topic or chapterJ248: sub-topicsJ248: paragraphs headed Underlying knowledge and understandingJ248: paragraphs headed Common misconceptionsJ258: Key Stage 1 to 3 items listed
J248 C1 Particles222–
J248 C2 Elements, compounds and mixtures333–
J248 C3 Chemical reactions444–
J248 C4 Predicting and identifying reactions and products222–
J248 C1 to C4 (this route only)111111–
J258 C1 Air and water–––10
J258 C2 Chemical patterns–––14
J258 C3 Chemicals of the natural environment–––8
J258 C4 Material choices–––10

Working for J248: 2 + 3 + 4 + 2 = 11 sub-topics across C1 to C4, and each of the 11 carries one paragraph of each kind. The J258 figures are bullet items per chapter and are not added across chapters here, because a count of bullets says how much OCR lists, not how hard it is. Both counts are our reading of one version of each specification.

Which Papers Examine the First-Year Topics?

On J248, the specification divides the first-year topics between papers. It says Paper 1 and Paper 3, one at each tier, “assess content from Topics C1 to C3 and C7.” Paper 2 and Paper 4 “assess content from Topics C4 to C6, with assumed knowledge of Topics C1 to C3 and C7.” Set beside the planner, C4 is in the Year 10 column of the J248 tab but is examined on Paper 2 and Paper 4, alongside C5 and C6. That is our reading of the two documents. For tier choices, our OCR GCSE Chemistry Foundation tier and OCR GCSE Chemistry Higher tier pages cover the two entries. The J248/03 Higher report adds: “The first two questions in Section B overlap with the foundation tier paper.”

OCR’s J258 specification says the Breadth and Depth components can assess content from across the whole specification, so a first-year chapter can appear on any of them.

Practical skills are examined on both routes. J248 Papers 1 and 3 name Topic C7 beside C1 to C3 above, and J258 lists its practical skills as Chapter C8.

Support for the first-year topics

Book a free consultation to talk through Year 10 OCR GCSE Chemistry tuition on the topics in OCR’s Year 10 column, from the particle model to electrolysis.

Book a Free Consultation Message us on WhatsApp

What Do the J248 Paper 1 and Paper 3 Reports Say About First-Year Topics?

J248/01 (Paper 1, Foundation) and J248/03 (Paper 3, Higher) are the two papers that assess C1 to C3, the first three of the four topics in OCR’s Year 10 column, together with C7, and OCR says so in each Summer 2025 report. The J248/01 report states: “This unit assesses topics C1, C2, C3 and C7 and is worth 50% of the total GCSE.” The J248/03 report states: “This paper is designed to assess content from Topics C1, C2 and C3 and is 50% of the total GCSE.” We read both reports end to end. What follows describes one series and is not a forecast.

Our rule. A question part counts if the commentary printed under that question’s label contains the word misconception, in any case. A part counts once, however often the word appears in it: in the Higher report Question 19 (d) has the word in a sentence and again in a Misconception box, and counts once. Foundation and Higher are counted separately and are not added together. By this rule J248/01 (Foundation) has 2 parts and J248/03 (Higher) has 6.

J248/01 Foundation: the two parts

The two Foundation parts are Question 17 (b) (i) and Question 21 (a) (ii), each with its own Misconception box in the report.

J248/03 Higher: the six parts

Question 20 is the six-mark Level of Response question on the Higher paper, and the report prints its misconception in a box under that question.

Where the specification and the reports name the same idea

Setting these report items beside the specification’s misconception paragraphs is our reading of which topic each item concerns; the pairings are ours.

Foundation or Higher tier?

Book a free consultation to talk through Year 10 OCR GCSE Chemistry tuition for the tier your student is entered for.

Book a Free Consultation Message us on WhatsApp

What the Foundation overview names as answered well or less well

The Foundation report’s Section A overview says: “Questions 1 (states of matter), 2 (atomic structure), 3 (radius of an atom) and 9 (law of conservation of mass) were answered correctly by almost all candidates.” It continues: “Questions 4 (polymers), 10 (state symbols) and 13 (products of a salt preparation) proved to be particularly challenging.” Its Section B overview adds: “The Periodic Table, graphs, basic atomic structure, experimental details and chromatography were well known.”

Two individual parts stand out for their wording. Question 19 (b) (i): “The structure of alloys was not well known.” Question 22 (a): “Nanoparticle size was not well known.” The same report says of Question 23 (b) (i), on the changes needed in a chromatography method: “The changes were quite well known.”

On the Higher paper, the Question 16 (c) commentary reads: “Most candidates correctly calculated both the surface area and the volume of the cube”, and Question 22 (f), the pH calculation, records a common incorrect answer: “A common incorrect answer was a pH of 4.7.”

What Parents Say

DP

Deborah Prior

★★★★★
Confidence and progress

My son was low in confidence after COVID and the gaps in learning were building up. Using this service helped plug those gaps, rebuild confidence, and improve his ability to learn properly again.

NI

Nicola

★★★★★
Amazing tutors!

We arranged maths and English tuition ahead of GCSEs and both tutors were brilliant. My daughter's grades improved, and by results day she achieved two grades higher than in her mock exams.

S

Saifan Khan

★★★★★
Great Teaching and Focused Learning

I attended an English bootcamp with Leading Tuition and the experience was excellent. The teacher gave focused attention to the small group while keeping the lessons interactive and engaging.

Which Practical Work Starts in Year 10?

Both specifications set a floor for practical work. The J248 specification asks centres to confirm that learners had the opportunity to “undertake at least eight practical activities”, and its declaration says each learner “has completed the practical activities set by OCR as detailed in Topic C7”. The J258 specification says: “It is compulsory that learners complete at least eight practical activities.” Its declaration points to Chapter C8 in the words “as detailed in Chapter C8”.

Our count, and the rule. In the J248 specification’s content for each topic, some named activities carry a label in brackets such as (PAG C8), where PAG stands for Practical Activity Group. We counted each bracketed group after a named activity as one, with a group that wraps across two lines counting once. The result is C1 0, C2 6, C3 7 and C4 8. Our calculation: 0 + 6 + 7 + 8 = 21 labelled activities across the four first-year topics. For comparison, the same count gives 10 in C5 and 4 in C6. Across the labels in C2 to C4, all eight groups, PAG C1 to PAG C8, appear at least once.

OCR’s planning booklet for J248 lists, beside sub-topic C3.2 Energetics: “PAG C8: Measuring the temperature change in reactions.” Both J248 reports comment on a temperature-change practical, and each names the lid:

The Foundation report’s Question 21 (a) (i) also records: “Most added magnesium to the copper sulfate but many gave the temperature after mixing as the initial temperature.” Pairing the booklet’s PAG C8 line with these questions is our reading of the topic and the apparatus.

The planning booklet also says: “we would recommend on-going revision of key concepts throughout the course”. For a first-year student that is OCR’s own statement about how a linear course is meant to be run.

Year 10 chemistry, first-year practicals

Book a free consultation to talk through Year 10 OCR GCSE Chemistry tuition, including the practical work OCR’s specifications require.

Book a Free Consultation Message us on WhatsApp

What Do the J258 Reports Say on Particle-Model and Metal Questions?

Every J258 component can assess any chapter, so we pair a J258 report item with a topic only where the specification’s own wording, or a code printed in the report, fixes it. Two items meet that test. Each is quoted from its own report and kept in its own component.

J258/03 (Higher, Breadth), Question 6 (a). The J258/03 report says of Question 6 (a) (i): “The most common misconception was that particles in a liquid are spaced apart.” Of Question 6 (a) (ii) it says: “this was well answered with almost all candidates able to describe a limitation of the particle model.” The J258 specification’s first topic, C1.1, has two assessable learning outcomes in these words: “recall and explain the main features of the particle model in terms of the states of matter and change of state” and “explain the limitations of the particle model in relation to changes of state”. Pairing Question 6 (a) with C1.1 is our reading; chapter C1 is in the Year 10 column of the J258 tab.

J258/01 (Foundation, Breadth), Question 2 (a) (i). The J258/01 report says: “Most candidates, even the highest scoring, thought that metals had a covalent structure.” Its Assessment for learning box under that question reads: “Candidates should realise that metallic bonding is neither covalent nor ionic, but a separate category (C3.1).” The code C3.1 is OCR’s own. In the J258 specification, C3.1 is headed “C3.1 How are the atoms held together in a metal?” and sits in chapter C3, which the J258 tab places in Year 10.

Both reports are for the Summer 2025 series. Nothing in this section is a forecast for any later series.

Frequently Asked Questions About Year 10 OCR GCSE Chemistry

Which topics does OCR's sample outline put in Year 10 for each Chemistry route?

On the J248 (Chemistry A) tab, C1 is in September, C2 runs from September to January, C3 from January to May, C4 from May to July and C5 in July. On the J258 (Chemistry B) tab, C1 runs from September to November, C2 from November to January, C3 from January to April, C4 from May to July and C5 in July. These are the month labels of OCR's suggested outline; for J248 OCR's planning booklet says centres are free to teach the topics in the order that suits them.

Does OCR's outline say when Year 10 exams fall?

Both planner tabs, A_2yr_BCP for J248 and B_2yr_BCP for J258, carry one row in June labelled Yr10Exams. C4 sits on the rows either side of it in both tabs. The last C3 row is in May on the J248 tab and in April on the J258 tab. The label is part of OCR's sample outline for a two-year Key Stage 4, which is a suggestion, so a school's own calendar can differ.

Which J248 papers test the Year 10 topics?

The J248 specification says Paper 1 (Foundation) and Paper 3 (Higher) assess content from Topics C1 to C3 and C7. Paper 2 and Paper 4 assess Topics C4 to C6 with assumed knowledge of Topics C1 to C3 and C7. So C4, which OCR's outline puts in the Year 10 column, is examined on Paper 2 and Paper 4 with C5 and C6. The Summer 2025 J248/01 and J248/03 reports each give 50% of the GCSE to their paper.

Which Chemistry B components can test the first-year chapters?

OCR's J258 specification says its Breadth components (J258/01 and J258/03) and its Depth components (J258/02 and J258/04) assess content from across all teaching chapters 1 to 8. A chapter from the Year 10 column of OCR's J258 tab, such as C1 Air and water or C3 Chemicals of the natural environment, can therefore be examined on any of the four J258 components, at either tier.

What do the OCR specifications say learners should already know for the first four topics?

For J258, each chapter opens with a Key Stage 1 to 3 list: our count is 10 bullet items for C1, 14 for C2, 8 for C3 and 10 for C4. For J248, each of the 11 sub-topics carries an Underlying knowledge and understanding paragraph, headed in the specification as what learners should be familiar with linked to the sub-topic; C4.2 asks for familiarity with cations and anions from electrolysis, and C2.2 asks for familiarity with the Mendeleev Periodic Table and the modern Periodic Table.

How many practical activities does OCR require, and where do they start?

Both specifications require at least eight practical activities: J248 through its centre statement and Topic C7, J258 through its statement and Chapter C8. Our count of PAG labels in the J248 specification gives 0 in C1, 6 in C2, 7 in C3 and 8 in C4, which is 21 across the four first-year topics, and all eight groups, PAG C1 to PAG C8, appear among them. The planning booklet lists PAG C8 temperature-change work beside C3.2 Energetics.

Which misconceptions do the J248 Paper 1 and Paper 3 reports name?

By our rule, counting each question part whose commentary contains the word misconception, the Summer 2025 J248/01 Foundation report has 2 parts, Question 17 (b) (i) and Question 21 (a) (ii). The J248/03 Higher report has 6 parts: Questions 12, 16 (a), 17 (b) (i), 18 (c) (ii), 19 (d) and 20. The two tiers are counted separately.

Year 10 OCR GCSE Chemistry exam prep

Book a free consultation to talk through Year 10 OCR GCSE Chemistry tuition for Chemistry A (J248) or Chemistry B (J258). Leading Tuition is rated 4.8 out of 5 on Trustpilot from 59 reviews, read on 3 October 2026. 91% of our students achieve their desired grades.

Book a Free Consultation
Message us on WhatsApp