Year 11 AQA GCSE Chemistry: Where the Marks Went

AQA 8462 examiner-report findings, assessment weightings and suggested teaching hours, set out for Year 11.

Book a Free Consultation

AQA GCSE Chemistry (8462) is a linear qualification examined on two papers, each 100 marks and 1 hour 45 minutes, sat on 17 May and 15 June 2027. Our count of AQA's June 2025 reports on the two Higher papers finds 18 items where AQA says a quarter or fewer of students gained the marks, nine on each paper. This page tallies them by topic and sets out the weightings and 2027 arrangements around them.

The papers, topics and tier structure are set out on our AQA GCSE Chemistry (8462) guide. What follows adds only what a Year 11 student can take from AQA's own published reports, scheme of work and update notes.

Year 11 AQA GCSE Chemistry tuition

Our expert GCSE chemistry tutors help Year 11 students working towards AQA 8462 at both Foundation and Higher tier. Book a short call about AQA GCSE Chemistry tuition for your student’s tier.

Book a Free Consultation Message us on WhatsApp

Which Higher Tier Questions Lost the Most Marks in AQA GCSE Chemistry?

AQA publishes a report on the examination for every paper. For 8462/1H, the report says over 115 000 students sat the component, so the picture it paints is drawn from a very large cohort. The table below is our own count from that report and the 8462/2H report. It is one series of papers, read item by item, and it describes what AQA reported; it does not forecast any later paper. Students on the Higher tier AQA GCSE Chemistry route will meet these papers directly.

How the tally was built

An item is counted when AQA's own comment gives a share of students at or below a quarter gaining the item's marks: the mark itself for a one-mark item, or both or all of the marks where AQA says so. Items AQA describes only as “very few” are not counted, because no figure is given. One item that AQA puts at just over a quarter (8462/2H 06.2, on the test for aluminium ions) sits above the line and is also left out. Each item is assigned to a topic by the specification section the question draws on, which is our judgement, not AQA's.

Item What the item asked Share of students AQA reports Topic
8462/1H 01.1Where metals and non-metals sit on the periodic tableA quarter scored the mark1
8462/1H 03.1Which substance is reduced, answered in terms of oxygenOne in seven awarded both marks4
8462/1H 04.5Explaining the reactivity trend down Group 7One in seven scored all four marks1
8462/1H 05.6Why nanoparticles suit a coating on glassesAbout one in ten scored both marks2
8462/1H 06.3Why cryolite is used in extracting aluminiumOne in five scored the mark4
8462/1H 06.4Writing the equation for the change at an electrodeOne in five scored both marks4
8462/1H 07.1Evaluating two fuel cells (extended response)One in eight reached level 25
8462/1H 08.6pH, concentration and acid strengthOne in ten scored one mark4
8462/1H 09.1Planning a salt preparation from zinc and iodine (extended response)One in six awarded full marks4
8462/2H 01.3Heating a water sample until its mass is constantA quarter knew the idea and gained two marks10
8462/2H 03.2How the oxide layer on aluminium relates to corrosionFewer than 1 in 5 achieved both marks10
8462/2H 04.2Linking the timeline of changes in the Earth's atmosphere5% gained both marks9
8462/2H 06.3Giving the symbol and charge of an ionA quarter gained the mark8
8462/2H 06.4Giving the symbol and charge of a second ionA quarter gained the mark8
8462/2H 07.2Identifying a polyesterAround 15% correct7
8462/2H 07.4Identifying a polypeptide1 in 5 gained the mark7
8462/2H 07.5Drawing the displayed carboxylic acid group of glycineOnly 15% recognised the displayed structure7
8462/2H 07.8Describing the structure of a thermosetting polymer1 in 5 gained any marks10

Source: AQA, report on the examination for GCSE Chemistry 8462/1H and 8462/2H, June 2025, comments on the individual items named. The proportions are AQA's wording; the topic column is ours.

The same 18 items, counted by topic

Topic Paper it is assessed on Items counted
1 Atomic structure and the periodic tablePaper 12
2 Bonding, structure and the properties of matterPaper 11
3 Quantitative chemistryPaper 10
4 Chemical changesPaper 15
5 Energy changesPaper 11
6 The rate and extent of chemical changePaper 20
7 Organic chemistryPaper 23
8 Chemical analysisPaper 22
9 Chemistry of the atmospherePaper 21
10 Using resourcesPaper 23
TotalPaper 1 topics 9, Paper 2 topics 918

Working: 2 + 1 + 0 + 5 + 1 = 9 for Topics 1 to 5; 0 + 3 + 2 + 1 + 3 = 9 for Topics 6 to 10; 9 + 9 = 18. Paper assignment follows AQA's specification at a glance.

Chemical changes carries five of the 18 items: electrolysis (two items), reduction in terms of oxygen, acid strength, and the planning of a salt preparation. Organic chemistry and using resources carry three each, and Topics 3 and 6 carry none by this criterion. Quantitative chemistry still lost marks in other ways, which the calculation paragraph below describes, but none of its items is counted in the tally.

Chemistry tuition for the Higher papers

Our expert GCSE chemistry tutors help Higher tier students working towards both AQA 8462 papers. Book a call about GCSE Chemistry tuition for your student.

Book a Free Consultation Message us on WhatsApp

What Do the Examiners Say Those Lost Marks Have in Common?

Three patterns recur across the 18 items, and each is stated in AQA's own commentary rather than inferred from the marks alone.

Words that were close to right but not creditworthy

AQA's general comment on 8462/1H opens with the point that “Imprecise use of language caused problems for many students”. It names ‘amount’ used where volume or mass was needed, and ‘intermolecular forces’ applied to ionic, covalent and metallic bonds. The cryolite item shows the effect. On 8462/1H 06.3 one in five students scored the mark, and AQA notes that many missed the point and wrote about ions flowing; the idea it wanted is that the mixture has a lower melting point than pure aluminium oxide, so less energy is required, and it adds that aluminium oxide has a fixed melting point. The same idea appears at Foundation tier in 8462/1F 05.4, where only one in 20 scored both marks.

On 8462/1H 04.5 the same issue is about which noun carries the explanation. AQA records answers that said ‘the elements’ or ‘they’ had more shells, where the credited idea concerns the atom, and attraction described between the nucleus and the ‘outer shell’ rather than the outer-shell electrons. One in seven scored all four marks.

Facts the specification states, left unlearnt

Two items carry this in AQA's own wording. For 8462/1H 01.1, only a quarter scored the mark “despite the clear statement in the specification”. For 8462/2H 07.1, AQA says “Although these compounds are clearly identified in the specification, very few had learnt them”. The Foundation report for Paper 1 makes the same point in its general comments: “Several questions showed that students are unwilling to learn facts that are stated in the specification”. Three of the items in the table (8462/2H 07.2, 07.4 and 07.5) concern polyesters, polypeptides and the amino acid glycine. For 07.4 and 07.5 AQA says the definition or the structural formula is given in the specification and the difficulty lay in applying it: for 07.5 only 15% recognised that the displayed structure of the carboxylic acid group was needed.

Evaluation answers that stopped at comparison

The two extended-response evaluation items split the cohort. On 8462/1H 07.1, the fuel-cell question, one in eight reached level 2. AQA's explanation is specific: comparisons taken from the table were not enough, the consequences of each comparison were needed, and “many answers contained no judgement at all”. It adds that when data are compared, sometimes neither option has a real advantage, and that is a valid point to make; many answers instead argued that one danger outweighed another. By contrast, on 8462/2H 03.1, the aluminium-or-wood door question, around two fifths of students reached Level 3, with reasons linked to the table and to other knowledge and a judgement; AQA says weaker responses that gave only comparisons and no consequences were limited to level 1.

The salt-preparation item, 8462/1H 09.1, is described by AQA as an AO3 question that asked students to apply a required-practical technique to a new situation. One in six were awarded full marks. AQA records that the most common error was to ignore the flammability of ethanol and heat with a direct flame instead of using a water bath or electric heater.

Foundation tier in the same series

The 8462/1F report says the paper was sat by over 19 000 students, and that questions 8, 9 and 10, common to the Higher paper, were left unanswered by between 10% and 25% of students apart from the multiple-choice items. The tally above is a Higher count and is not a statement about Foundation items; students sitting Foundation tier AQA GCSE Chemistry will find their own item-level comments in the Foundation reports on AQA's assessment resources page.

Calculation items: where the marks went

None of the calculation items is counted in the tally, but unit conversion is named as the common error in three multi-step items. On 8462/1H 08.4, the titration concentration, nearly a half gave fully correct answers and AQA records volumes that were not converted to dm3. On 8462/2H 01.5, over half scored all five marks, with an incorrect or missing conversion from cm3 to dm3 the usual loss. On 8462/2H 05.7 over 40% scored all five, and the commonest error was omitting the conversion from dm3 to cm3. On 8462/1H 09.2, the percentage-yield calculation, nearly a half gained full marks, and AQA notes that working which made no chemical sense could be limited to the mark for the correct number of significant figures.

Working on the precision AQA asks for?

Our expert chemistry tutors work with Year 11 students on the exact wording, calculations and evaluation answers that AQA 8462 papers reward. Book a call to talk about GCSE Chemistry tuition.

Book a Free Consultation Message us on WhatsApp

How Do the 200 Scaled Marks Divide Between Recall, Application and Evaluation?

AQA's scheme of assessment states that the assessment objectives are set by Ofqual and are the same across all GCSE Chemistry specifications and all exam boards. AO1 is demonstrating knowledge and understanding, AO2 is applying it, and AO3 is analysing information and ideas to interpret and evaluate, make judgements and draw conclusions, and develop and improve experimental procedures. Each paper carries 100 raw marks with a scaling factor of x1, so the two papers together give a total scaled mark of 200.

Objective Weighting on each paper (approx %) Overall weighting (approx %) Scaled marks out of 200 (working)
AO1 knowledge and understanding37 to 434040% of 200 = 80
AO2 application37 to 434040% of 200 = 80
AO3 analysis and evaluation17 to 232020% of 200 = 40
Total100 marks per paper10080 + 80 + 40 = 200

Source: AQA GCSE Chemistry 8462 specification, section 5.2.1 and 5.3. The scaled-mark column is our arithmetic from AQA's overall percentages.

The AO3 line is the one the extended-response items above draw on. At 20% overall it is worth 40 of the 200 scaled marks, and AQA calls both 8462/1H 07.1 and 8462/1H 09.1 AO3 questions. Separately, the specification says questions drawing on the required practical activities will count for at least 15% of the overall marks, which is at least 30 of the 200 scaled marks (15% of 200 = 30), and it lists eight required practical activities.

How Many Teaching Hours Does AQA Suggest for Each Topic?

The specification says it is designed to be taken over two years, and that students complete all assessments at the end of the course. AQA's schemes of work for GCSE Chemistry are organised topic by topic, each with a “Suggested timing (hours)” column against every specification reference, and AQA describes them as a flexible medium-term plan. The table below adds that column up for each of Topics 1 to 10, so it is by topic rather than by school year. Which topics your school has already taught, and which remain for Year 11, is something only your teacher can tell you.

Topic Paper Suggested hours in AQA's scheme of work
1 Atomic structure and the periodic table111.0
2 Bonding, structure and the properties of matter113.0
3 Quantitative chemistry112.0
4 Chemical changes119.0
5 Energy changes17.0
6 The rate and extent of chemical change210.0
7 Organic chemistry216.5
8 Chemical analysis214.0
9 Chemistry of the atmosphere210.0
10 Using resources216.0
TotalPaper 1 topics 62.0, Paper 2 topics 66.5128.5

Source: AQA GCSE Chemistry 8462 schemes of work for Topics 1 to 10. Working: 11.0 + 13.0 + 12.0 + 19.0 + 7.0 = 62.0; 10.0 + 16.5 + 14.0 + 10.0 + 16.0 = 66.5; 62.0 + 66.5 = 128.5. Each topic figure is the sum of the suggested hours against every specification reference in that topic's file.

Read this table beside the tally in the first section as description only. Chemical changes has the largest suggested figure, at 19.0 hours. In the tally it also has the largest item count, at 5, while Topics 3 and 6 show 12.0 and 10.0 hours with no items counted. The two tables come from different documents, a teaching plan and one series of examiner reports, and this page does not connect them. The tally is not a reason to spend more or fewer hours on any topic.

A tutor for the AQA 8462 papers

Our expert GCSE chemistry tutors help Year 11 students prepare for both AQA 8462 papers, Foundation and Higher. Book a call about GCSE Chemistry tuition for your student.

Book a Free Consultation Message us on WhatsApp

What Parents Say

DP

Deborah Prior

★★★★★
Confidence and progress

My son was low in confidence after COVID and the gaps in learning were building up. Using this service helped plug those gaps, rebuild confidence, and improve his ability to learn properly again.

NI

Nicola

★★★★★
Amazing tutors!

We arranged maths and English tuition ahead of GCSEs and both tutors were brilliant. My daughter's grades improved, and by results day she achieved two grades higher than in her mock exams.

S

Saifan Khan

★★★★★
Great Teaching and Focused Learning

I attended an English bootcamp with Leading Tuition and the experience was excellent. The teacher gave focused attention to the small group while keeping the lessons interactive and engaging.

What Has AQA Confirmed About the Next Papers?

AQA's key-dates page for 8462 lists Paper 1 (8462/1F and 8462/1H) on 17 May 2027 and Paper 2 (8462/2F and 8462/2H) on 15 June 2027. Both start in the morning and last 1 hour 45 minutes. The full timetable, paper contents and tier detail sit on the parent guide linked at the top of this page, so they are not repeated here.

A “show your working” prompt on multi-step calculations

AQA's autumn 2026 GCSE Science subject update says it will be adding the prompt “show your working” to the stem of multi-step calculation questions. It states that where the instruction appears, students must show some working, and that the correct answer on the answer line with no working shown will gain one mark. AQA also advises showing working in all calculation questions, because compensatory marks may be available for earlier stages, and says the instruction is compulsory only where a question specifically says so. The 2025 reports above record working that made no chemical sense, and missed conversions between cm3 and dm3, among the errors on the calculation items.

Formulae and equation sheets

The same update says the GCSE Maths and GCSE Science formulae and equation sheets for 2027 are available and that “There are no changes from 2026”. AQA says students can continue to use the current versions for revision and exam practice. Check the sheets on AQA's subject update and ask your teacher which apply to your tier and papers.

Required practicals

AQA's practical assessment section says questions in the written exams will draw on the knowledge and understanding students gain from the required practical activities and will count for at least 15% of the overall marks. The salt-preparation item in the tally, 8462/1H 09.1, is one such link between a practical and a new context.

How to Use These Reports While Revising

The June 2025 question papers and mark schemes are listed beside the examiner reports on AQA's GCSE Chemistry 8462 assessment resources page. Our suggestion, which is ours and not AQA's, is to find each item in the table, attempt it cold, then read AQA's comment on it before marking against the scheme. The report comments tell you which wording earned the mark. For revision across all Year 11 subjects, our Year 11 GCSE final-year revision guide covers the general approach, and our GCSE Chemistry tuition page covers the subject more widely.

Revising from the AQA reports with a tutor

Our expert GCSE chemistry tutors can work through the June 2025 items above with Year 11 students, checking the wording AQA credits. Book a call about AQA GCSE Chemistry tuition.

Book a Free Consultation Message us on WhatsApp

Frequently Asked Questions About Year 11 AQA GCSE Chemistry

How many students sit AQA GCSE Chemistry Paper 1 at Higher tier?

AQA's report on the examination for 8462/1H says over 115 000 students sat that component in June 2025, and the report for 8462/1F says its paper was sat by over 19 000 students. Because so many candidates sit the Higher paper, AQA's item-level comments describe a very wide range of responses; the report says many students showed excellent and comprehensive understanding while others had difficulty even with basic chemical concepts.

Which Higher tier chemistry questions had the lowest success rates?

By our count from AQA's June 2025 reports, 18 Higher-tier items had a quarter or fewer of students gaining the marks: nine on 8462/1H and nine on 8462/2H. Chemical changes (Topic 4) accounts for five, organic chemistry (Topic 7) and using resources (Topic 10) for three each, and the rest are spread across Topics 1, 2, 5, 8 and 9. It is one series, so it describes what AQA reported rather than predicting a later paper.

How are the marks split between AO1, AO2 and AO3 in AQA GCSE Chemistry?

AQA gives overall weightings of about 40% for AO1 (knowledge and understanding), 40% for AO2 (application) and 20% for AO3 (analysis and evaluation). With a total scaled mark of 200 across the two 100-mark papers, that is 80, 80 and 40 marks. On each paper AQA gives a band rather than an exact figure: 37 to 43% for AO1 and AO2 and 17 to 23% for AO3.

What does the “show your working” prompt mean for chemistry calculations?

AQA's autumn 2026 GCSE Science update says the prompt "show your working" will be added to the stem of multi-step calculation questions. Where it appears, students must show some working, and the correct answer on the answer line with no working gains one mark. AQA advises showing working in every calculation, because compensatory marks may be available for earlier steps; the instruction is compulsory only where a question specifically says so.

How long are the AQA GCSE Chemistry papers and when are they sat?

Each paper is 1 hour 45 minutes, 100 marks and 50% of the GCSE, and both are written exams at Foundation and Higher tier. AQA's key-dates page lists Paper 1 (8462/1F and 8462/1H) on 17 May 2027 and Paper 2 (8462/2F and 8462/2H) on 15 June 2027, both in the morning. That puts 29 days between the two papers, counted from 17 May to 15 June.

Does AQA suggest how long to spend on each chemistry topic?

AQA's schemes of work for Topics 1 to 10 carry a suggested timing in hours against each specification reference. Added up, the suggestions total 128.5 hours: 62.0 for the five Paper 1 topics and 66.5 for the five Paper 2 topics. Chemical changes has the largest figure at 19.0 hours and energy changes the smallest at 7.0. AQA describes the schemes of work as a flexible medium-term plan, so the totals are a guide and not a requirement.

How much of the AQA GCSE Chemistry exam draws on required practicals?

AQA's practical assessment section says questions in the written exams will draw on the knowledge and understanding gained from the required practical activities, and that these questions will count for at least 15% of the overall marks. On the 200 scaled marks that is at least 30 marks. The specification lists eight required practical activities, and the June 2025 salt-preparation item, 8462/1H 09.1, asked students to apply a practical technique to a new situation.

Reviewed November 2026: figures checked against AQA's June 2025 reports on the examination for 8462/1H, 8462/2H and 8462/1F, its scheme of assessment, practical assessment and key-dates pages, its scheme-of-work files and its autumn 2026 GCSE Science subject update.

Year 11 AQA GCSE Chemistry Tuition

Our expert GCSE chemistry tutors help Year 11 students preparing for AQA 8462 at Foundation and Higher tier. Book a call about GCSE Chemistry tuition for your student.

Leading Tuition is rated 4.8 out of 5 on Trustpilot from 59 reviews, read on 3 October 2026, and 91% of our students achieve their desired grades.

GCSE Chemistry tuition

Book a Free Consultation
Message us on WhatsApp