AQA GCSE Chemistry (8462) is a linear, two-year GCSE sat in two papers of 100 marks, and AQA's specification calls sections 4.1 to 4.3 fundamental. Our count of AQA's June 2025 mark schemes finds 85 of 221 question parts across the four papers citing those sections. AQA's examiners' reports give a share below half of students for 35 of the 85.
Book a free consultation to talk through Year 10 AQA GCSE Chemistry tuition.
This page is for a student starting the course in Year 10 and for the parent beside them. It follows the sections AQA names, in AQA's own documents, rather than a term-by-term teaching order. The whole-course picture, grade structure and papers sit on the AQA GCSE Chemistry page, and the final-year view is on the Year 11 AQA GCSE Chemistry page. Everything below is read from AQA's specification, its published mark schemes and examiners’ reports and its key-dates page.
What Does AQA Say Chemistry Has to Be Built On?
On the subject-content page of the specification, AQA writes that the concepts and principles in sections 4.1, 4.2 and 4.3 are "fundamental to an understanding of chemistry" and underpin much of the content in later sections. It then says what that means for the exams: students will be "directly examined" on these concepts in Paper 1, and should be able to "apply these concepts" in their answers in Paper 2. The at-a-glance page repeats the Paper 2 point, saying questions in Paper 2 may draw on fundamental concepts and principles from sections 4.1 to 4.3.
The three sections are 4.1 Atomic structure and the periodic table, 4.2 Bonding, structure, and the properties of matter, and 4.3 Quantitative chemistry. Paper 1 assesses Topics 1 to 5, which adds Chemical changes and Energy changes. Paper 2 assesses Topics 6 to 10: The rate and extent of chemical change, Organic chemistry, Chemical analysis, Chemistry of the atmosphere, and Using resources. Each paper is a written exam of 1 hour 45 minutes, worth 100 marks and 50% of the GCSE.
AQA says the specification is designed to be taken over two years and that the qualification is linear: students complete all assessments at the end of the course and in the same series. On earlier learning, the specification states that Key Stage 3 content need not be taught again during the GCSE course where it has already been covered. It also says most of the content is co-teachable with GCSE Combined Science: Trilogy. AQA's Quantitative chemistry scheme of work describes itself as a "flexible medium term plan", and this page takes AQA's statement of what is fundamental as its guide, not a sequence.
How Much of Each Paper Draws on Sections 4.1 to 4.3?
AQA prints, against every question part in a mark scheme, the assessment objective and the specification content the part is intended to cover, in a column headed "AO / Spec. Ref." We used that column. Our count covers the four June 2025 mark schemes: 8462/1H, 8462/2H, 8462/1F and 8462/2F.
The counting rule. A question part is a numbered part such as 01.2. It counts as citing 4.1 to 4.3 if at least one reference printed against it begins 4.1., 4.2. or 4.3. A part counts once however many references it carries: part 01.2 of 8462/1H prints 4.1.2.3, 4.2.2.7 and 4.2.2.8 and counts once. Parts that cite 4.1 to 4.3 and also cite a later section are shown in their own column: part 02.7 of 8462/2H prints 4.1.1.1, 4.3.1.1 and 4.7.1.3, the last in section 4.7, so it is in that column. We counted parts, not marks, and parts carry different numbers of marks, so a share of parts is not a share of marks.
The check. The four mark schemes carry 222 part labels (47, 51, 60 and 64). Our extraction found no specification reference against one part, 8462/2H 06.6, so it is left out of the 221. In each mark scheme the question totals sum to 100 marks, which is how we checked that the question and part counts were complete.
Paper (June 2025)
Parts in the mark scheme
Parts with a printed specification reference
Parts citing 4.1 to 4.3
Share of those parts (our calculation)
Cite only 4.1 to 4.3
Also cite a later section
8462/1H Higher Paper 1
47
47
36
36 of 47 = 76.6%
32
4
8462/2H Higher Paper 2
51
50
9
9 of 50 = 18.0%
0
9
8462/1F Foundation Paper 1
60
60
29
29 of 60 = 48.3%
28
1
8462/2F Foundation Paper 2
64
64
11
11 of 64 = 17.2%
0
11
Source: AQA June 2025 mark schemes for 8462/1H, 2H, 1F and 2F, column AO / Spec. Ref.; counts and shares are ours.
On Higher Paper 1, 36 of 47 parts cite 4.1 to 4.3 (76.6%, our calculation); on Foundation Paper 1 the figure is 29 of 60 (48.3%). Paper 1 is the paper on which AQA says students are directly examined on these sections, and it also covers 4.4 and 4.5. On Paper 2 the figures are 9 of 50 on Higher (18.0%) and 11 of 64 on Foundation (17.2%). Each of those 20 Paper 2 parts also cites a section from 4.4 onward.
Book a free consultation to talk through Year 10 AQA GCSE Chemistry tuition.
What Sits Inside Sections 4.1 to 4.3, and What Is Higher-Only?
Counting the numbered headings in the specification, section 4.1 has 3 sections and 15 numbered statements, section 4.2 has 4 sections and 18, and section 4.3 has 5 sections and 13. That is 46 numbered statements in all (our calculation: 15 + 18 + 13). Section 4.1 runs from atoms, elements and compounds (4.1.1.1) to the typical properties of transition metals (4.1.3.2). Section 4.2 runs from chemical bonds (4.2.1.1) to the uses of nanoparticles (4.2.4.2). Section 4.3 starts with conservation of mass and balanced equations (4.3.1.1) and ends with the use of amount of substance in relation to volumes of gases (4.3.5).
AQA says content that applies only to the Higher Tier is indicated by (HT only), and content that applies only to chemistry by (chemistry only). Our count of the headings in these three sections is below.
HT only, in headings: six, all in 4.3. They are 4.3.2.1 Moles, 4.3.2.2 Amounts of substances in equations, 4.3.2.3 Using moles to balance equations, 4.3.2.4 Limiting reactants, 4.3.4 and 4.3.5.
Chemistry only, in headings: five. They are 4.1.3 Properties of transition metals, 4.2.4 Bulk and surface properties of matter including nanoparticles, 4.3.3 Yield and atom economy of chemical reactions, 4.3.4 and 4.3.5.
HT only, inside paragraphs: one line in 4.1 (writing balanced half equations and ionic equations), two in 4.2 (the limitations of the simple particle model and of particle theory in relation to changes of state) and three in 4.3.
The specification also cites maths skills against its content. Section 7 lists 18 maths skills, and the right-hand columns of 4.1, 4.2 and 4.3 cite 12 of them (our count; 4.1 cites 1b, 1d and 5b, 4.2 cites eight and 4.3 cites seven, with overlaps). The 12 include standard form, significant figures, changing the subject of an equation and surface areas and volumes of cubes. AQA says these are not the only opportunities and that it is good practice to teach all the maths skills throughout the course.
On practical work, AQA lists eight required practical activities, with written-exam questions drawing on them worth at least 15% of the overall marks, and schools give AQA a practical science statement confirming that each student made a contemporaneous record of the work.
Which Questions on These Sections Did Fewer Than Half of Students Answer?
AQA publishes a report on each paper. We took the 85 parts counted above and read what the 8462/1H, 8462/2H, 8462/1F and 8462/2F reports say about each one. This is our tally of one series, not a forecast, and the rule is as follows.
Below half: the report gives a share of students for the part's full marks (or its single mark) that is below one half, in words or figures. "Fewer than half", "a third", "one in six", "nearly a half", "over 40%" and "very few" all count, because each is below 50%.
Half or more: the share is half or higher, for example "half", "just over a half" or "over half".
No share for the part's marks: the report gives no share for the part's full marks, or only a share for one marking point or for "at least one mark", or a range that spans half such as "about half" or "fewer than three fifths".
A report sentence is counted once, under the part whose heading it sits in, and an item enters the tally only if the report's own words meet the rule. Higher and Foundation are counted separately, and the row-by-row list is kept in this page's evidence file.
Report (June 2025)
Parts citing 4.1 to 4.3
Share below half
Share half or more
No share for the part's marks
8462/1H Higher Paper 1
36
14
19
3
8462/2H Higher Paper 2
9
3
5
1
Higher, both papers
45
17
24
4
8462/1F Foundation Paper 1
29
13
10
6
8462/2F Foundation Paper 2
11
5
4
2
Foundation, both papers
40
18
14
8
Source: AQA June 2025 reports on the examination for 8462/1H, 2H, 1F and 2F; parts as counted in the first table; classification and counts are ours.
On the Higher Tier, the reports give a share below half for 17 of the 45 parts, half or more for 24, and no usable share for 4. On Foundation the figures are 18, 14 and 8 of 40. A few of the Higher Paper 1 parts below half:
01.4, Mendeleev and the placing of elements: only two fifths of students were able to make sensible comments.
02.1, the formula from an ionic diagram: fewer than half of students could count the ions and realise that the ratio was 1:1, so that the formula is CaS.
05.3, Bohr's contribution to the atomic model: only one third of students gave a fully correct answer.
07.3, an advantage of a ball and stick model: fewer than half gave one of the expected answers.
On Foundation Paper 1, part 09.3 on graphite is a worked example of a low share: fewer than a quarter of students scored a single mark and very few scored all four. On Paper 2 the parts below half include 8462/2F 01.5, where fewer than 1 in 5 students correctly identified a precipitate as a solid, and 8462/2F 09.2, where just over a quarter correctly identified both changes of state.
Many of the other parts were answered well. Nearly all students drew the electronic structure correctly in 8462/1H 01.3 and nearly all chose the correct name in 8462/1F 01.1. In 8462/2H 02.1, over 90% of students correctly identified fractional distillation, which the mark scheme links to 4.1.1.2.
Book a free consultation to talk through Year 10 AQA GCSE Chemistry tuition.
My son was low in confidence after COVID and the gaps in learning were building up. Using this service helped plug those gaps, rebuild confidence, and improve his ability to learn properly again.
NI
Nicola
★★★★★
Amazing tutors!
We arranged maths and English tuition ahead of GCSEs and both tutors were brilliant. My daughter's grades improved, and by results day she achieved two grades higher than in her mock exams.
S
Saifan Khan
★★★★★
Great Teaching and Focused Learning
I attended an English bootcamp with Leading Tuition and the experience was excellent. The teacher gave focused attention to the small group while keeping the lessons interactive and engaging.
How Did the Same Questions Fare on Foundation and Higher?
The Higher Paper 1 report says Questions 1, 2 and 3 were common to the Foundation Tier, and the Foundation Paper 1 report says Questions 8, 9 and 10 were common to the Higher Tier. Over 115 000 students sat 8462/1H and over 19 000 sat 8462/1F. The pairing in the table below is our reading: we paired parts by the content of each report's comment (the same compound, the same property, the same marking point) and kept only the pairs where the wording lined up.
Higher part (8462/1H)
Foundation part (8462/1F), our pairing
What the part is about (our reading)
Higher report
Foundation report
02.1
09.1
Writing the formula of an ionic compound from a diagram of its ions
Fewer than half of students could count the ions and realise that the ratio was 1:1
Only one in ten scoring the mark
02.4
09.4
Small molecules and overall electric charge (a specification statement)
More than half scored the mark, usually by mentioning the lack of delocalised electrons
Only one in six scored the mark
02.5
09.5
Choosing the correct reason in a comparison involving poly(ethene) and methane
Just over a half gave the correct reason
Only a third gave the correct reason
Source: AQA June 2025 reports on the examination for 8462/1H and 8462/1F; part pairing and descriptions are ours.
These are different cohorts answering the same question, so the table is not a difficulty ranking. It shows how each report words the share for the same question. For part 02.4 the Higher report adds that very few gave the expected answer, the specification statement that small molecules do not have an overall electric charge, and that most of those who scored did so by referring to the lack of delocalised electrons. The Foundation report for 09.4 describes a clear statement in the specification that the molecules do not have an overall electrical charge, and says those who gained credit usually mentioned there being no delocalised electrons.
The tier pages are Foundation AQA GCSE Chemistry and Higher AQA GCSE Chemistry. AQA awards grades 1 to 5 on Foundation and grades 4 to 9 on Higher, with an allowed grade 3 for a Higher student who just fails to achieve grade 4.
Which Wording Habits Lose Marks in These Sections?
The Higher Paper 1 report opens its general comments by saying that imprecise use of language caused problems for many students. On the parts counted here, the reports return to a small set of habits.
Calling ionic bonding intermolecular. In 8462/1H 06.1 the report says some students ruined their answer with the word intermolecular, "which is not appropriate as there are no molecules".
Writing an equation when a formula is asked for. In 02.1 the report says a formula was required, not an equation, and equations did not gain credit. In 04.4 it says writing an equation is never an appropriate response when asked for a formula.
Describing sharing and transfer together. In 02.2 the report says any mention of sharing electrons negated the first three marking points. In 8462/1F 09.2 some students followed an answer about electron transfer by also referring to sharing electrons. AQA's teaching guide Exploring common misunderstandings in GCSE science makes the general point that a correct statement can be "cancelled out by a wrong statement".
Subscripts and superscripts. The Higher report says accurate use of subscripts and superscripts is fundamental to chemistry and expected in word-processed answers as well as handwritten ones. In 8462/2F 02.6 the report says that when writing formulas, the tops of numbers should be discernibly below the tops of upper-case letters.
Not learning what the specification states. The Foundation Paper 1 report says several questions showed that students are "unwilling to learn facts that are stated in the specification".
Book a free consultation to talk through Year 10 AQA GCSE Chemistry tuition.
How Does Section 4.3 Show Up in a Paper 2 Calculation?
Section 4.3 is where the specification puts masses, moles and concentrations. In 8462/2F 08.5, a Foundation calculation citing 4.3.2.5 and 4.10.1.2, over half of students gained 4 of the 5 marks, and the most common mistake was not converting the volume at all or converting it incorrectly. The report adds that students sometimes forgot to divide by 4 to get a mean, and that marks could be awarded for other steps when one step was completed incorrectly.
What the counts suggest practising in Year 10. These are our suggestions from the reports above, not AQA's:
Learn the wording of the specification statements in 4.1 and 4.2, including which are tagged HT only or chemistry only.
When a question asks for a formula, write a formula, with subscripts set clearly below the line.
Keep a bonding answer to one idea, either transfer or sharing, and check it for a sentence that cancels another.
Write the volume conversion into every calculation that gives a volume in cm³, and show each step so that partial marks stay available.
Frequently Asked Questions About Year 10 AQA GCSE Chemistry
What does AQA say chemistry has to be built on?
AQA's specification says the concepts and principles in sections 4.1, 4.2 and 4.3 are fundamental to an understanding of chemistry and underpin much of the content in later sections. Those sections are atomic structure and the periodic table, bonding, structure and the properties of matter, and quantitative chemistry. Students are examined directly on them in Paper 1 and should apply them in Paper 2. AQA's Quantitative chemistry scheme of work describes itself as a flexible medium term plan.
How many question parts in the AQA papers cite sections 4.1 to 4.3?
Our count from the four June 2025 mark schemes is 85 of the 221 parts that print a specification reference: 36 of 47 on Higher Paper 1, 29 of 60 on Foundation Paper 1, 9 of 50 on Higher Paper 2 and 11 of 64 on Foundation Paper 2. Our extraction found no reference against one further part, 8462/2H 06.6, which is left out of the 221. We counted parts, not marks, and a part with several references counts once.
How much of Paper 2 uses the first three sections?
On our count, 9 of the 50 Higher Paper 2 parts and 11 of the 64 Foundation Paper 2 parts that print a reference cite 4.1 to 4.3. Every one of those 20 also cites a section from 4.4 onward. AQA says questions in Paper 2 may draw on fundamental concepts and principles from sections 4.1 to 4.3. Part 02.7 of 8462/2H, for example, prints 4.1.1.1, 4.3.1.1 and 4.7.1.3, the last in section 4.7.
What do Foundation and Higher change inside sections 4.1 to 4.3?
AQA awards grades 1 to 5 on Foundation and 4 to 9 on Higher, with an allowed grade 3 for a Higher student who just misses grade 4. Inside the three sections, six headings in 4.3 are tagged HT only (4.3.2.1 to 4.3.2.4, 4.3.4 and 4.3.5), and five headings are tagged chemistry only (4.1.3, 4.2.4, 4.3.3, 4.3.4 and 4.3.5). Section 4.1 also has one line tagged HT only and section 4.2 has two.
What do the required practicals add to the course?
AQA lists eight required practical activities, numbered 8.2.1 to 8.2.8. AQA says all students are expected to have carried them out. Schools give AQA a practical science statement confirming that each student made a contemporaneous record of the work and of the knowledge, skills and understanding derived from it.
Which maths skills do sections 4.1 to 4.3 call on?
Section 7 of the specification lists 18 maths skills. On our count, the right-hand columns of 4.1, 4.2 and 4.3 cite 12 of them: 1a, 1b, 1c, 1d, 2a, 2h, 3a, 3b, 3c, 4a, 5b and 5c. They include standard form (1b), significant figures (2a), changing the subject of an equation (3b) and surface areas and volumes of cubes (5c). AQA says these are not the only opportunities and that it is good practice to teach all the maths skills throughout the course.
When is the first paper in an AQA chemistry series, and how long is each paper?
AQA's key-dates page, read on 8 November 2026, lists the June 2027 series: Paper 1 (8462/1F and 8462/1H) on 17 May and Paper 2 (8462/2F and 8462/2H) on 15 June. Each paper is a written exam of 1 hour 45 minutes, worth 100 marks and 50% of the GCSE. All assessments are taken at the end of the course and in the same series.
Year 10 AQA GCSE Chemistry Tuition
Students starting AQA 8462 in Year 10 can book a free consultation to talk through Year 10 AQA GCSE Chemistry tuition. The wider GCSE chemistry tuition page covers every exam board, and the Year 10 GCSE preparation guide covers the year across subjects.
Book a free consultation to talk through Year 10 AQA GCSE Chemistry tuition.