Year 11 Edexcel GCSE Chemistry 2027: Topics and Lost Marks

Pearson’s own Year 11 topics, what its June 2025 reports say, and the 2027 paper dates

Book a Free Consultation

Edexcel GCSE Chemistry (1CH0) is the Pearson GCSE (9-1) chemistry qualification assessed in two papers of 1 hour 45 minutes and 100 marks each, timetabled for Monday 17 May 2027 and Tuesday 15 June 2027. Pearson’s 11-16 course planner lists seven Year 11 chemistry topics totalling 38 hours (our sum). This page sets those topics beside what Pearson’s June 2025 examiners’ reports say about each. The full 1CH0 overview is on the Edexcel GCSE Chemistry 1CH0 page.

Book a free consultation to talk through Year 11 Edexcel GCSE Chemistry tuition.

Book a Free Consultation Message us on WhatsApp

Which Chemistry Topics Does Pearson List for Year 11?

Two Pearson documents name Year 11 chemistry content for teachers, and this page uses both. Both are Pearson’s planning material, so the order a student’s own lessons follow is set by their school’s scheme of work. Every figure in this section is Pearson’s except the sums, which are marked as our calculation and shown with their working.

Pearson’s 11-16 Science Learning Pathway (Chemistry)

Pearson’s course materials page for its GCSE Sciences qualifications lists the 11-16 Science Learning Pathway (Chemistry). The document calls itself “an additional free resource” and “An alternative, linear approach to teaching Science”. Its Separate Science route table plans the chemistry topics across five years, and the Year 11 rows are below, with Pearson’s own hours, specification references and paper tags.

Pearson’s Year 11 row Hours Specification reference given by Pearson Paper tag given by Pearson
C11.1 Tests for ions 4 GCSE topic 9 (9.1C- 9.9C) paper 2
C11.2 Organic Chemistry 8 GCSE topic 9 (9.10C- 9.34C) paper 2
C11.3 Quantitative analysis 10 GCSE topic 5 (5.8C- 5.18C) paper 1
C11.4 Cells 2 GCSE topic 5 (5.25C to 5.27C) paper 1
C11.5 Nanoparticles 2 GCSE topic 9 (9.35C – 9.39C) paper 2
C11.6 Equilibria 6 GCSE topic 5 (5.19C- 5.24C) paper 1
C11.7 Earth and atmospheric science 6 GCSE topic 8 (8.18- 8.26) paper 2
Year 11 total (our calculation) 38 4 + 8 + 10 + 2 + 2 + 6 + 6 7 rows

Our calculation: the Separate Science route table has 32 rows, and summing every hours figure gives Year 7 30, Year 8 24, Year 9 40, Year 10 52 and Year 11 38, which is 184 hours in all (30 + 24 + 40 + 52 + 38). The Year 11 rows are therefore 38 of the route’s 184 hours. Splitting the Year 11 rows by the paper tags Pearson gives, the rows tagged paper 1 sum to 18 hours (10 + 2 + 6) and the rows tagged paper 2 to 20 hours (4 + 8 + 2 + 6). Year 10 has ten rows in the same table, including Reversible reactions at 2 hours and Groups in the Periodic Table at 4 hours.

Pearson’s Chemistry Mastery Topic Progression Mapping for Year 11

A second Pearson document is listed on the same course materials page. It describes itself this way: “This is your overview of GCSE content taught in year 11, and how it links with prior learning in year 10.” Its contents table names eight Year 11 topics, each marked “Chemistry only”, with the Year 10 topics that each one links to where Pearson lists them:

The document spells out what sits inside several of these. Topic 11.1 covers percentage yield (specification points 5.11C to 5.12C) and atom economy, with Pearson’s objective “Know how to calculate atom economy.” Topic 11.2 includes “Know flame colours for Li+, Na+, K+, Ca2+, Cu2+” and “Know the test for ammonia.” Topic 11.5 includes “Understand how alkene monomers polymerise to form a long chain molecule.” and topic 11.6 includes “Know the functional group and formulae of the first four alcohols.”

Pearson’s mapping names Year 10 learning as the prior knowledge for topic 11.1. Pearson writes of Year 10 topic 10.1: “Topic 10.1 completely underpins this topic and should be thoroughly understood for progression to this topic.” Pearson’s Year 10 objectives under that topic include “Know how to find an empirical formula.” and “Know how to calculate a concentration in gdm-3 and moldm-3”. Those two calculations return in the examiners’ reports quoted next.

Book a free consultation to talk through Year 11 Edexcel GCSE Chemistry tuition for Foundation or Higher tier.

Book a Free Consultation Message us on WhatsApp

What Do Pearson’s Reports Say About Each Year 11 Topic?

Pearson publishes an examiners’ report for each 1CH0 paper. The four June 2025 reports are Paper 1 Foundation (1F), Paper 1 Higher (1H), Paper 2 Foundation (2F) and Paper 2 Higher (2H), and every row below is quoted from one of them. Our rule for entering a row: the report’s own sentence about the question gives a share or a comparison, such as “half”, “majority”, “less than 10%” or “almost all”. The wording is quoted exactly and we have not turned any phrase into a number of our own. Foundation and Higher are kept apart by the paper label. We filed each question under the Year 11 mapping topic whose title or listed content names what the question asks; the filing is ours, not Pearson’s.

Pearson Year 11 topic (Year 11 mapping) Paper and question What the June 2025 report says
11.1 Quantitative analysis 1H Q4(c)(i), percentage yield “Almost all candidates scored both marks here, with only a very small minority scoring 1 or 0 marks.”
11.1 Quantitative analysis 1H Q4(c)(ii), atom economy calculation “but it was well answered with the majority of candidates scoring all 3 marks.”
11.1 Quantitative analysis 1H Q4(c)(iii), how finding a use for other products changes atom economy “This question was poorly answered and the majority of candidates did not score any marks here.”
11.2 Tests for ions 1H Q9(a), why litmus paper must be damp in the test for ammonia “Over half of all responses scored no marks at all, although there were a lot of near misses.”
11.2 Tests for ions 2F Q2(a), flame colours of three metal ions “Candidates found this challenging with only the more able scoring the full three marks for correctly identifying all three metal ions.”
11.2 Tests for ions 2H Q9(c), telling two salts apart with sodium hydroxide solution “This led most candidates to identify ‘aluminium’ but many were not explicit about ‘calcium’ remaining undissolved as a white precipitate.”
11.2 Tests for ions 2H Q9(d), explaining two precipitate tests on one sample “few candidates scoring all three marks and the majority failing to score even one mark.”
11.3 Chemical technology 1H Q1(b)(ii), an advantage of fuel cells “This question was not well answered, with less than half of the candidates scoring a mark.”
11.3 Chemical technology 2H Q4(c)(i), a nanosheet coating for crisp packets (our filing) “Candidates were not particularly successful on this question with less than 10% scoring two marks.”
11.4 Titrations 1F Q5(e), choosing concordant values “It was surprising that the two concordant values were not often chosen.”
11.4 Titrations 1H Q10(b)(i), rinsing the burette with distilled water “There were 2 marks available, with most candidates scoring either 1 mark or nothing.”
11.4 Titrations 1H Q10(b)(ii), rinsing the burette with the acid “Just less than half of responses scored the mark for rinsing the burette with sulfuric acid.”
11.5 Hydrocarbons 2F Q4(a)(i), picking out the alkene “In general, this was well answered with around half of the candidates scoring both marks for explaining that molecule B was an alkene due to the presence of the double bond.”
11.5 Hydrocarbons 2F Q10(a)(ii), how monomer molecules form a polymer “Candidates found this challenging with only the most able scoring both marks for showing an understanding that the double bond of the monomer breaks and then links to form a long chain.”
11.5 Hydrocarbons 2H Q4(a)(ii), how monomer molecules form a polymer “It was disappointing to see just over a third of the candidates scoring two marks on what should be a straightforward question.”
11.5 Hydrocarbons 2H Q10(b), drawing the repeating unit from a monomer “it was again surprising to see that within this cohort about half the candidates could not make a reasonable attempt at formulating the repeating unit from the monomer”
11.6 Further organic chemistry 2H Q10(a)(ii), the formula of ethanol and balancing “About half of the candidates could remember the formula of ethanol. Of those, only about two thirds could balance the equation.”
11.7 Equilibria 1H Q9(b)(i), defining dynamic equilibrium (equal rates) “Approximately half of the candidates were able to state that at dynamic equilibrium the rate of the forward and reverse reactions are equal.”
11.7 Equilibria 1H Q9(b)(i), defining dynamic equilibrium (constant concentrations) “Only a small percentage of responses correctly identified that the concentration of reactants and products remain constant.”
11.7 Equilibria 1H Q9(b)(iii), the effect of a lower pressure “Most candidates were correctly able to state that reducing the pressure would decrease the yield or shift the equilibrium to the left but only about half of these were able to explain why the yield would decrease.”
11.8 Earth and atmosphere 2H Q7(d), the six-mark carbon dioxide and greenhouse effect question “The majority of candidates were able to access this question well giving a correlation from the graph and several processes and as a result were able to reach level 2 and 3.”

Read by topic, the rows show different things on the two tiers. Within 11.1, the report says the atom economy calculation was well answered, while the item asking why finding a use for other products changes atom economy was not. Within 11.5 the same idea, how monomers form a polymer, appears on both tiers: Foundation 2F Q10(a)(ii) and Higher 2H Q4(a)(ii) each carry the report’s wording above. Within 11.2, the Higher report adds “few candidates scoring all three marks and the majority failing to score even one mark.” Pearson’s Higher Paper 1 report also describes Question 9 as “the most challenging question on the paper overall”.

Book a free consultation to talk through Year 11 Edexcel GCSE Chemistry tuition, whichever tier your student sits.

Book a Free Consultation Message us on WhatsApp

Year 10 topics that surfaced in the same papers

The same reports quote shares for calculations and ideas that Pearson’s mapping lists under Year 10. Pearson’s specification lists Topic 1 (Key concepts in chemistry) under both papers, and the Year 10 topics below sit in topics that Pearson assigns to Paper 1 (Topics 1 to 5) or Paper 2 (Topic 1 and Topics 6 to 9), so this second table uses the same rule and the same filing method, now against the mapping’s Year 10 topics.

Pearson Year 10 topic (Year 11 mapping, prior learning) Paper and question What the June 2025 report says
10.1 Calculations involving masses 2F Q9(c), empirical formula from masses of carbon and hydrogen “Candidates found this challenging with the vast majority scoring no marks.”
10.1 Calculations involving masses 2H Q3(c), empirical formula of a hydrocarbon “For most candidates, the calculation of the empirical formula of the hydrocarbon was very straightforward.”
10.1 Calculations involving masses 2F Q8(c), mass of solid from concentration and volume “Candidates found converting the volume from cm 3 to dm 3 and rearranging the equation to calculate the mass of solid very challenging with only the most able scoring the full two marks.”
10.1 Calculations involving masses 2H Q2(c), mass of solid from concentration and volume “The most frequent seen was in the conversion of units of volume from cm3 to dm3.”
10.2 Groups in the periodic table 2H Q5(b)(ii), explaining reactivity in group 1 “Mostly, this question was answered well with about half the candidates scoring all three marks.”
10.4 Fuels 2F Q9(a)(i), the homologous series of most crude oil hydrocarbons “This was poorly understood and only the more able knew that the alkanes were the homologous series and the majority not scoring.”
10.7 Reversible reactions 1H Q9(c), ammonium chloride heated and cooled in a tube “This question was very poorly answered by the majority of candidates.”

Two of these pairs are worth reading side by side. The empirical formula question is quoted for Foundation (2F Q9(c)) and for Higher (2H Q3(c)) with opposite descriptions, and the volume conversion from cm³ to dm³ is the point of the 2F Q8(c) and 2H Q2(c) rows. Pearson’s mapping lists finding an empirical formula and calculating a concentration as Year 10 objectives, which is why both appear in this table and not the first. Each figure in both tables belongs to Pearson’s June 2025 series only.

What Parents Say

DP

Deborah Prior

★★★★★
Confidence and progress

My son was low in confidence after COVID and the gaps in learning were building up. Using this service helped plug those gaps, rebuild confidence, and improve his ability to learn properly again.

NI

Nicola

★★★★★
Amazing tutors!

We arranged maths and English tuition ahead of GCSEs and both tutors were brilliant. My daughter's grades improved, and by results day she achieved two grades higher than in her mock exams.

S

Saifan Khan

★★★★★
Great Teaching and Focused Learning

I attended an English bootcamp with Leading Tuition and the experience was excellent. The teacher gave focused attention to the small group while keeping the lessons interactive and engaging.

What Do the Four Paper Summaries Ask Students To Do?

Each June 2025 report ends with a Paper Summary of bullets for students. Together the four hold 31 bullets (6 + 10 + 7 + 8), and we counted them against one rule. A bullet is content if it names a specific chemistry topic, test, substance or calculation type, practical if it is about practical work or the core practicals, and technique if it is about how to answer or show working with no named topic, such as command words, rounding, units, legibility or past papers. Each bullet takes one class. We read the bullets from the reports’ text, then recounted them from the raw PDF text with a second script; both counts gave 31, and the row-by-row list is kept in our evidence file.

Report Content Practical Technique Bullets
Paper 1 Foundation (1F) 4 1 1 6
Paper 1 Higher (1H) 1 2 7 10
Paper 2 Foundation (2F) 3 1 3 7
Paper 2 Higher (2H) 4 1 3 8
All four (our count) 12 5 14 31

This is one series of reports, so it describes June 2025 and nothing beyond it. Within it, some themes recur across papers (also our count):

Set beside the first table, tests for ions is the Year 11 topic that Pearson’s course planner gives 4 hours and that three of the four summaries name. Quantitative analysis is the planner’s largest Year 11 row at 10 hours. Those are two separate counts and we draw no link between them beyond placing them next to each other.

Book a free consultation to talk through Year 11 Edexcel GCSE Chemistry tuition and the Paper 1 and Paper 2 dates.

Book a Free Consultation Message us on WhatsApp

How Many Minutes Does Each Mark Get, and When Are the Papers?

Pearson’s GCSE (9-1) Chemistry specification gives the two papers the same shape. For Paper 1 it states: “Paper 1 (*Paper code: 1CH0/1F and 1CH0/1H) Written examination: 1 hour and 45 minutes 50% of the qualification 100 marks” For Paper 2 it states: “Paper 2 (Paper code: 1CH0/2F and 1CH0/2H) Written examination: 1 hour and 45 minutes 50% of the qualification 100 marks” Our calculation: 105 minutes divided by 100 marks is 1.05 minutes per mark, and the two papers together are 210 minutes (2 × 105) for 200 marks (2 × 100).

Two further requirements come from the same specification. On timing it says “Students must complete all assessment in May/June in any single year.” On practical work it says “Students must carry out all eight of the mandatory core practicals listed below.”

Pearson’s Summer 2027 examination timetable (marked FINAL) lists Paper 1 on Monday 17 May 2027 and Paper 2 on Tuesday 15 June 2027, both in the morning at 1h 45m, for Foundation (1CH0 1F and 2F) and Higher (1CH0 1H and 2H) alike. Our calculation: from 17 May to 15 June 2027 is 29 days (14 days left in May plus 15 in June). Pearson’s 2026-2027 key dates list 21 February 2027 as the GCSE entry deadline for the June 2027 series at UK centres.

Each tier has its own page: Foundation Edexcel GCSE Chemistry for papers 1F and 2F, and Higher Edexcel GCSE Chemistry for papers 1H and 2H.

In What Order Could a Year 11 Student Revise These Topics?

This is our suggestion, built from the counts above and not from a statement by Pearson. It is one possible order, and a teacher who has seen a student’s mock paper can change it.

  1. Rounding and units first. They are named in all four Paper Summaries, and they surface in the 2F Q8(c) and 2H Q2(c) rows.
  2. Tests for ions next. Three of the four summaries name them, and the course planner lists the topic at 4 hours.
  3. The explanation questions in quantitative analysis and equilibria. Both are quoted above from the Higher Paper 1 report, one on atom economy (Q4(c)(iii)) and one on equilibrium and reversible reactions (Q9).
  4. Titration method. The 1H report quotes the burette steps (Q10(b)) and the 1F report quotes the choice of concordant values (Q5(e)).

Mock season is the natural point to test that order against real marks; our guide to how many GCSE mocks Year 11 sit covers the mock calendar. The Year 11 pages for other courses follow the same method: Year 11 AQA GCSE Chemistry and Year 11 Edexcel GCSE Maths. For tutoring across the subject, see GCSE Chemistry tuition and GCSE tuition.

Book a free consultation to talk through Year 11 Edexcel GCSE Chemistry tuition for Paper 1 and Paper 2.

Book a Free Consultation Message us on WhatsApp

Sources: Pearson 11-16 Science Learning Pathway (Chemistry), Pearson GCSE Chemistry Mastery Topic Progression Mapping Year 11, the four June 2025 GCSE Chemistry examiners’ reports (1CH0 1F, 1H, 2F, 2H), the GCSE (9-1) Chemistry specification, the Summer 2027 examination timetable and the 2026-2027 key dates, all from Pearson’s GCSE Sciences course materials.

Frequently Asked Questions About Year 11 Edexcel GCSE Chemistry

How many hours does Pearson give Year 11 in its chemistry course planner?

Pearson’s 11-16 Science Learning Pathway (Chemistry) has seven Year 11 rows on its Separate Science route: Tests for ions 4 hours, Organic Chemistry 8, Quantitative analysis 10, Cells 2, Nanoparticles 2, Equilibria 6 and Earth and atmospheric science 6. Our calculation: 4 + 8 + 10 + 2 + 2 + 6 + 6 = 38 hours, out of 184 hours across the route’s 32 rows. It is Pearson’s planning material for teachers.

Which question did the Higher Paper 1 report call the most challenging?

The June 2025 report for 1CH0 1H says “Question 9 proved to be the most challenging question on the paper overall and there was a noticeable dip in the performance of candidates throughout this question.” Question 9 covered ammonia and equilibrium. On Q9(a), the report says “Over half of all responses scored no marks at all, although there were a lot of near misses.” On Q9(c), it says “This question was very poorly answered by the majority of candidates.”

Which tests for ions do Pearson’s paper summaries tell students to learn?

Three of the four June 2025 Paper Summaries name them (our count). 1F says “Learn the full description of tests for gases and ions.” 2F says “Learn keys tests from the specification, for example tests for ions, chlorine and for saturation in organic substances.” 2H says “Learn the qualitative tests for identifying cations and anions as listed in the specification.” Pearson’s Year 11 mapping lists “Know flame colours for Li+, Na+, K+, Ca2+, Cu2+” under topic 11.2.

How many minutes per mark does each 1CH0 paper allow?

Pearson’s specification gives each paper 1 hour and 45 minutes for 100 marks, and each paper is 50% of the qualification. Our calculation: 105 minutes ÷ 100 marks = 1.05 minutes per mark. Across the two papers that is 210 minutes (2 × 105) for 200 marks (2 × 100). The specification also says “Students must complete all assessment in May/June in any single year.”

How far apart are the two Edexcel GCSE Chemistry papers?

Pearson’s Summer 2027 timetable puts Paper 1 on Monday 17 May 2027 and Paper 2 on Tuesday 15 June 2027, each in the morning at 1h 45m, for both Foundation and Higher tier. Our calculation: 29 days apart (14 days left in May plus 15 in June). Pearson’s 2026-2027 key dates list 21 February 2027 as the GCSE entry deadline for the June 2027 series at UK centres.

Do unit conversions such as cm3 to dm3 appear in the examiners’ reports?

Yes. The 2F report says “Candidates found converting the volume from cm 3 to dm 3 and rearranging the equation to calculate the mass of solid very challenging with only the most able scoring the full two marks.” The 2H report says “The most frequent seen was in the conversion of units of volume from cm3 to dm3.” Rounding or unit conversion is also named in all four Paper Summaries (our count), including 2F’s “Learn how to convert units, eg cm3 to dm3.”

How many of the Paper Summary bullets are about technique rather than a topic?

Our count of the four June 2025 summaries, 31 bullets in all (6 + 10 + 7 + 8), gives 14 technique bullets, 12 content bullets and 5 practical bullets. Technique means command words, showing working, rounding, units, legibility or past papers with no named topic. The 1H summary holds 7 technique bullets out of its 10, and the 1F summary holds 1 out of its 6. It is one series, not a prediction.

Talk Through Year 11 Edexcel GCSE Chemistry Tuition

Book a free consultation to talk through Year 11 Edexcel GCSE Chemistry tuition at Foundation or Higher tier, with Higher tier and Foundation tier pages for each paper.

Leading Tuition is rated 4.8 out of 5 on Trustpilot from 59 reviews, read on 3 October 2026.

91% of our students achieve their desired grades.

Book a Free Consultation
Message us on WhatsApp