Year 11 Edexcel GCSE Combined Science (1SC0)

The six paper dates, the mark arithmetic and what Pearson’s June 2025 examiners’ reports record

Book a Free Consultation

Pearson Edexcel GCSE Combined Science (1SC0) is a qualification worth two GCSE grades, examined through six papers of 60 marks, each lasting 1 hour 10 minutes. Pearson’s final summer 2027 timetable places them between 11 May and 18 June 2027: Biology 1, Chemistry 1 and Physics 1 in May, then Biology 2, Chemistry 2 and Physics 2 in June.

Our Edexcel GCSE Combined Science (1SC0) page covers the six papers, grading, boundaries and tier content. This page reads the same qualification from a Year 11 student’s side, using Pearson’s specification, its extended open response guidance, its final summer 2027 timetable and the examiners’ reports it published for all twelve foundation and higher paper codes in June 2025. Every figure is attributed to the Pearson document that states it, and every figure we calculate ourselves is labelled as our calculation with the working shown.

Book a free consultation to talk through Year 11 Edexcel GCSE Combined Science tutoring for the 1SC0 papers.

Book a Free Consultation Message us on WhatsApp

Which papers fall on which day, and what each one covers

The table joins three Pearson documents: the Summer 2027 examination timetable (sitting days), the 1SC0 specification (paper names and the topics each paper lists) and our own arithmetic on the gaps between sitting days. All six sittings are morning sittings of 1 hour 10 minutes.

Sitting day (Pearson timetable)Paper codesSpecification nameTimetable paper numberTopics the specification listsDays since previous sitting (our calculation)
Tuesday 11 May1BF, 1BHBiology 1 (specification Paper 1)Paper 1Topics 1 to 5: key concepts, cells and control, genetics, natural selection and genetic modification, health and diseaseFirst sitting
Monday 17 May1CF, 1CHChemistry 1 (specification Paper 3)Paper 2Topics 1 to 4: key concepts, states of matter and mixtures, chemical changes, extracting metals and equilibria6
Tuesday 25 May1PF, 1PHPhysics 1 (specification Paper 5)Paper 3Topics 1 to 6: key concepts, motion and forces, conservation of energy, waves, light and the electromagnetic spectrum, radioactivity8
Thursday 10 June2BF, 2BHBiology 2 (specification Paper 2)Paper 4Topics 1 and 6 to 9: key concepts, plant structures, animal coordination and homeostasis, exchange and transport in animals, ecosystems and material cycles16
Tuesday 15 June2CF, 2CHChemistry 2 (specification Paper 4)Paper 5Topics 1 and 6 to 8: key concepts, groups in the periodic table, rates of reaction and energy changes, fuels and Earth science5
Friday 18 June2PF, 2PHPhysics 2 (specification Paper 6)Paper 6Topics 1, 8, 9, 10, 12, 13, 14 and 15: key concepts, energy and forces doing work, forces and their effects, electricity and circuits, magnetism and the motor effect, electromagnetic induction, particle model, forces and matter3

The two Pearson documents number the papers differently. The specification numbers them in subject order: Paper 1 is Biology 1, Paper 2 is Biology 2, Paper 3 is Chemistry 1, Paper 4 is Chemistry 2, Paper 5 is Physics 1 and Paper 6 is Physics 2. The timetable numbers them in sitting order: Paper 1 is Biology 1, Paper 2 is Chemistry 1, Paper 3 is Physics 1, Paper 4 is Biology 2, Paper 5 is Chemistry 2 and Paper 6 is Physics 2. The paper codes (1BF and 1BH, 1CF and 1CH, and so on) are the same in both, so the codes match a past paper, a mark scheme or an examiner’s report to a sitting day.

Our calculation of the gaps, from the timetable dates: 11 May to 17 May is 6 days, 17 May to 25 May is 8 days, 25 May to 10 June is 16 days, 10 June to 15 June is 5 days and 15 June to 18 June is 3 days. From the first sitting to the last is 38 days.

Our reading of the specification’s content lists, counted by topic number: Biology 1 lists 5 topics, Biology 2 lists 5, Chemistry 1 lists 4, Chemistry 2 lists 4, Physics 1 lists 6 and Physics 2 lists 8, which makes 32 topic listings across the six papers. Topic 1 of each science (key concepts in biology, chemistry and physics) is listed on both of that science’s papers. Physics 2 lists eight topics against four for each chemistry paper. These are counts of listings, not of marks.

Pearson’s 2026–27 key dates (information manual) list 21 February 2027 as the entry deadline for GCSE in the June 2027 series at UK centres, and results for that series are released to centres on 18 August 2027 and may be released to candidates on 19 August 2027. The specification requires centres to submit the Practical Science Statement to Pearson by 15 April in the year the students sit their examinations.

How the marks divide across the papers (our calculation)

The specification gives each paper as 60 marks, 1 hour and 10 minutes and 16.67% of the qualification, and sets out assessment objective weightings as percentages. Across the qualification the weightings are 40% for AO1 (knowledge and understanding), 40% for AO2 (application) and 20% for AO3 (analysing information and ideas), each with a tolerance of plus or minus 3 percentage points. Each paper’s row in the specification reads 6.67, 6.67 and 3.33, which add to 16.67. The table below converts those percentages into marks. The mark figures in the table are our calculation.

ItemSpecification weightingMarks in one paper (our calculation)Across six papers (our calculation)
AO140%60 × 40% = 246 × 24 = 144 of 360
AO240%60 × 40% = 246 × 24 = 144 of 360
AO320%60 × 20% = 126 × 12 = 72 of 360
Check100%24 + 24 + 12 = 60144 + 144 + 72 = 360
Six-mark question (marks inside the AOs above)10% of a paper6 of 60 = 10%6 × 6 = 36 of 360 = 10%

Our arithmetic on time: six papers of 70 minutes is 420 minutes of examination, which is 7 hours, and 70 minutes for 60 marks works out at 1.17 minutes a mark. The specification says calculators may be used in the examination.

The qualification is graded on a 17-grade scale from 9–9 to 1–1 using the total subject mark, and the specification states that individual papers are not graded. Boundaries and tier detail sit on our Foundation tier Edexcel GCSE Combined Science and Higher tier Edexcel GCSE Combined Science pages.

Book a free consultation to talk through Year 11 Edexcel GCSE Combined Science tutoring at Foundation or Higher tier.

Book a Free Consultation Message us on WhatsApp

What the six-mark question asked in Pearson’s published reports

Pearson’s guidance notes on extended open response questions describe extended open response questions as the 6-mark questions found towards the end of a paper, and state that there is one in each Combined Science paper. They are marked with levels: Level 1 is 1–2 marks, Level 2 is 3–4 marks and Level 3 is 5–6 marks. The guidance lists Explain, Describe, Plan/Devise and Comment on among the command words used for them, and says they generally target a maximum of two assessment objectives. On our calculation above, the six-mark question is 10% of each paper.

The table lists eight of the June 2025 reports and what each says its extended or six-mark question asked, with the report code so a student can find the matching question paper.

ReportSourceWhat the report says the question askedWhat the report records
1BF (Foundation)1SC0 1BF reportPlan an investigation into the effect of the concentration of enzyme on the rate of activity.The report says the item was answered well and that a significant number of candidates omitted basic aspects of the plan.
1BH (Higher)1SC0 1BH reportApply knowledge of the stages needed to extract DNA from strawberries and the structure of DNA.The report says most candidates were able to access the extended writing response and describes the question as addressing practical knowledge.
2BF (Foundation)1SC0 2BF reportQuestion 6(c): devise a plan to estimate the number of named plant species growing in a field.The report says the majority who attempted it gained a mark in at least level one.
2BH (Higher)1SC0 2BH reportAn extended response in which the report records confusion over the role of glycogen, glucose, glucagon and insulin.The report says the question scored a range of levels from candidates of different ability.
1CF (Foundation)1SC0 1CF reportQuestion 5(b): use the first 12 elements to explain how the structure of the periodic table links to electronic configuration.The report says the link to groups was familiar and the link to periods was less commonly seen.
2CH (Higher)1SC0 2CH reportQuestion 5(d): carbon dioxide in the atmosphere, the processes that change it and its contribution to global warming.The report says over half of responses were in level 3, which needed the information in the question used alongside the processes and the greenhouse effect.
1PH (Higher)1SC0 1PH reportOne extended open response question on radioactivity, worth six marks.Topic and mark value are the report’s own statement.
2PH (Higher)1SC0 2PH reportQuestion 6(c): devise a procedure for taking measurements in electrical circuits and suggest what the outcomes might be.Topic and question number are the report’s own statement.

Our count, with the rule stated: a question is counted as a planning or practical item if the report’s text for it uses the word plan, devise or practical knowledge. On that rule four of the eight (1BF, 1BH, 2BF and 2PH) are planning or practical items. This is a count of one series of reports, and the table is a record of June 2025 papers rather than a forecast of any later paper.

Book a free consultation to talk through Year 11 Edexcel GCSE Combined Science tutoring, including the six-mark questions on each paper.

Book a Free Consultation Message us on WhatsApp

What Parents Say

DP

Deborah Prior

★★★★★
Confidence and progress

My son was low in confidence after COVID and the gaps in learning were building up. Using this service helped plug those gaps, rebuild confidence, and improve his ability to learn properly again.

NI

Nicola

★★★★★
Amazing tutors!

We arranged maths and English tuition ahead of GCSEs and both tutors were brilliant. My daughter's grades improved, and by results day she achieved two grades higher than in her mock exams.

S

Saifan Khan

★★★★★
Great Teaching and Focused Learning

I attended an English bootcamp with Leading Tuition and the experience was excellent. The teacher gave focused attention to the small group while keeping the lessons interactive and engaging.

Which reports name unit conversion and significant figures (our count)

Calculation marks run across all three sciences, so this count looks at all twelve June 2025 reports. The method is stated so it can be repeated. A report counts for unit conversion if its text describes converting a quantity between named units of measurement, such as centimetres to millimetres, nanometres to metres or minutes to seconds. A report counts for significant figures if its text contains the phrase significant figures; decimal places and rounding on their own do not count. We counted each report by searching the extracted text and then counted again by reading each hit in context. The 1BF report’s remark about converting a time range in millions of years to a number of years is a change of scale rather than between named units of measurement, and is not counted.

ScienceReports naming unit conversionReports naming significant figures
Biology1BH, 2BF1BH, 2BH
Chemistry1CF, 2CF, 2CH1CF, 1CH, 2CH
Physics1PH, 2PF, 2PH1PH, 2PF, 2PH
Total8 of 12 reports8 of 12 reports

Split by tier, as the tier papers are separate: unit conversion is named in four Foundation reports (2BF, 1CF, 2CF and 2PF) and four Higher reports (1BH, 2CH, 1PH and 2PH). Significant figures are named in two Foundation reports (1CF and 2PF) and in all six Higher reports (1BH, 1CH, 1PH, 2BH, 2CH and 2PH). This is one series, June 2025, and the counts describe those reports, not later papers.

What the reports say about unit conversion. The 1BH report describes a magnification calculation that needed a unit conversion followed by the determination of the magnification. The 2BF report records a working that showed misunderstanding of converting centimetres to millimetres. The 1CF report advises checking the units and converting to the correct units where required, and the 2CF report refers to an incorrect, or no, volume unit conversion. The 2CH report says candidates needed to perform a unit conversion to obtain the correct mass of solute. In physics, the 1PH report mentions converting 350 nanometres into metres, the 2PF report says the majority of candidates did not convert minutes into seconds, and the 2PH report shows a conversion from centimetres to metres in a worked response.

What the reports say about significant figures. The 1BH report says some candidates did not give the waist to hip ratio to the number of significant figures the question requested. The 1CF report advises practising rounding to different numbers of significant figures and decimal places, and the 1CH report advises care when rounding to a smaller number of significant figures. The 1PH report discusses an answer where the mass and force were given to 2 significant figures. The 2BH report records an improvement in the use of significant figures, the 2CH report lists rounding to the specified number of decimal places or significant figures among its points, and the 2PF and 2PH reports each describe a question asking for 2 significant figures.

Students who also take Year 11 Edexcel GCSE Maths can read the same kind of paper-by-paper record for that qualification on our Year 11 Edexcel maths page.

Book a free consultation to talk through Year 11 Edexcel GCSE Combined Science tutoring for the calculation questions on all six papers.

Book a Free Consultation Message us on WhatsApp

Physics papers and the equation sheet

Pearson’s notice on its equation sheet support page covers Pearson GCSE Physics and Combined Science (Physics) exams in 2025, 2026, and 2027. It says: “Clean copies of the equation sheet will be included with the exam papers for 2025, 2026, and 2027.” In Combined Science, the physics content is examined on 1PF and 1PH (Physics 1, Tuesday 25 May) and on 2PF and 2PH (Physics 2, Friday 18 June).

The June 2025 report for 1PH describes the 2025 arrangement in its own words: “a full list of all relevant Physics equations was also provided in a separate booklet as an appendix to the examination paper”. The same report says the assessment of mathematical skills involved selecting the relevant equations and became more demanding as the paper progressed, with some questions needing two or more steps. The 1PF report says most candidates managed the calculation questions where the equation was given, and that many did not show full substitution of numbers, or showed working that was unclear.

Read with the unit conversion count above, the physics reports give three separate things to practise on the papers that carry an equation sheet: choosing the equation, writing the substitution out in full, and converting units before substituting. These are our summary of what the reports describe, not a statement from Pearson about how to revise. The list of equations students are expected to recall is in the specification (Appendix 4) and is covered on our parent page, so it is not repeated here. For general Year 11 planning beyond this qualification, our Year 11 GCSE revision guide covers the school year as a whole.

Frequently Asked Questions About Year 11 Edexcel GCSE Combined Science

How long is each Edexcel combined science paper and how many marks is it worth?

Pearson’s specification sets each of the six 1SC0 papers at 1 hour and 10 minutes and 60 marks, and each paper is 16.67% of the qualification. Our calculation: six papers of 70 minutes is 420 minutes of examination, and 70 minutes for 60 marks is about 1.17 minutes a mark. The specification says calculators may be used in the examination, and that individual papers are not graded because the grade comes from the total subject mark.

Which combined science papers come first in the summer series?

Pearson’s final summer 2027 timetable puts Biology 1 (1BF and 1BH) on Tuesday 11 May, Chemistry 1 (1CF and 1CH) on Monday 17 May and Physics 1 (1PF and 1PH) on Tuesday 25 May. Biology 2 follows on Thursday 10 June, Chemistry 2 on Tuesday 15 June and Physics 2 on Friday 18 June. Every paper is a morning sitting of 1 hour 10 minutes. Our calculation: the gap from Physics 1 to Biology 2 is 16 days.

How many marks is the extended open response question worth, and how is it marked?

Pearson’s guidance describes extended open response questions as the 6-mark questions found towards the end of a paper, with one in each Combined Science paper. They are marked in levels: Level 1 is 1–2 marks, Level 2 is 3–4 marks and Level 3 is 5–6 marks. Our calculation: 6 of 60 marks is 10% of each paper, so across six papers the six-mark questions carry 36 of the 360 marks.

Will physics students get an equation sheet in the exam?

Pearson’s notice on equation sheet support for GCSE Physics and Combined Science (Physics) says: “Clean copies of the equation sheet will be included with the exam papers for 2025, 2026, and 2027.” The physics content in Combined Science is examined on Physics 1 (1PF and 1PH) on 25 May and Physics 2 (2PF and 2PH) on 18 June. The June 2025 report for 1PH describes the list as a separate booklet provided as an appendix to the examination paper.

Do the same topics appear on the May and June papers?

Our reading of the specification’s content lists: Topic 1 of each science is listed on both of that science’s papers, and the other topics are split between them. Biology 1 lists Topics 1 to 5 and Biology 2 lists Topics 1 and 6 to 9. Chemistry 1 lists Topics 1 to 4 and Chemistry 2 lists Topics 1 and 6 to 8. Physics 1 lists Topics 1 to 6, and Physics 2 lists Topics 1, 8, 9, 10, 12, 13, 14 and 15.

What are the entry and results dates for the summer series?

Pearson’s 2026–27 key dates list 21 February 2027 as the GCSE entry deadline for UK centres in the June 2027 series. Results for GCSE in that series are released to centres on 18 August 2027 and may be released to candidates on 19 August 2027. The specification adds that the Practical Science Statement must be submitted to Pearson by 15 April in the year the students sit their examinations.

Which grades can each tier award in combined science?

On the 17-grade scale from 9–9 to 1–1, Pearson’s specification makes grades 1–1 to 5–5 available at Foundation tier and 4–4 to 9–9 at Higher tier. It adds that a grade 4–3 may be awarded at Higher tier if the mark is a small number of marks below the 4–4 boundary. Each paper has 16 overlap marks that appear on both tiers, and students must complete all six assessments in the same tier.

Year 11 Edexcel GCSE Combined Science Tutoring

Our combined science tutors help Year 11 students preparing for the six Edexcel 1SC0 papers at both Foundation and Higher tier. See our GCSE Combined Science tuition overview, or browse all of our tuition subjects.

91% of our students achieve their desired grades.

Leading Tuition is rated 4.8 out of 5 on Trustpilot from 59 reviews, read on 3 October 2026.

Book a Free Consultation
Message us on WhatsApp