Year 10 AQA GCSE Combined Science: Trilogy 8464 and Synergy 8465

The topics AQA's end-of-Year-10 guide names, where each route's required practicals sit against them, and what AQA publishes for pacing the two years.

Book a Free Consultation

AQA GCSE Combined Science is a science qualification offered as Combined Science: Trilogy (8464) and Combined Science: Synergy (8465), each of which its specification describes as "designed to be taken over two years", so Year 10 is the first of the two. AQA's own end-of-Year-10 guide names 11 Trilogy topics and 4 Synergy topics, and 11 of the 21 required practicals on each route sit in topics it names (our count).

The two routes are separate qualifications and are never added together below. The AQA GCSE Combined Science overview covers both specifications. Statements about AQA are attributed to its documents, and each count of ours prints its rule.

Starting Combined Science in Year 10?

Book a free consultation to talk through Year 10 AQA GCSE Combined Science tutoring for Trilogy 8464 or Synergy 8465.

Book a Free Consultation Message us on WhatsApp

What does AQA's end-of-Year-10 guide say its tests cover?

AQA publishes a two-page step-by-step guide to its end-of-Year-10 science tests, AQA's end of Year 10 science tests guide. The guide is dated April 2017 and was written for the first assessment of the current specifications. It says there will be "one set of tests covering Combined Science: Trilogy, which includes the three separate sciences", and another set for Synergy. Each test is available at Foundation and Higher Tier, and the guide lists the topics below.

RouteScience or themeTopics the guide lists
Trilogy 8464BiologyCell biology; organisation; infection and response
Trilogy 8464ChemistryAtomic structure; bonding; quantitative chemistry; chemical change; energy changes
Trilogy 8464PhysicsEnergy; electricity; particle model of matter
Synergy 8465Life and environmental sciencesBuilding blocks; transport over large distances
Synergy 8465Physical scienceBuilding blocks for understanding; interactions over small and large distances

Our count of the lists: 3 + 5 + 3 = 11 Trilogy topics, and 2 + 2 = 4 Synergy topics. The guide gives the length of each paper as 30 minutes for Trilogy and 45 minutes for Synergy, and says students could sit them in separate sessions or in one 90 minute period. The periodic table and the physics equation sheet that students need are, in the guide's words, in the same folders as the papers.

The guide also describes how AQA expects schools to mark and analyse the tests. Each sample script has three sections: Foundation Tier only questions (low demand), questions common to both tiers (standard demand) and Higher Tier only questions (high demand). The analysis tool compares results with an AQA sample population on six areas: assessment objectives, level of demand, maths questions, practical questions, extended response questions and working scientifically. The guide states that the sample population comes from pilot schools and is "not a national cohort".

The tests themselves sit in a "password protected area" of AQA's website, and the guide asks that they are not posted online, so this page quotes only the guide's own description of them.

Which of AQA's Trilogy topics sit in Paper 1, and what can Paper 2 draw on?

The Trilogy 8464 specification assigns its 24 topic sections to six papers: two each for biology, chemistry and physics. Each paper assesses distinct topic areas. Paper 1 of each science covers the first sections listed in that science, and Paper 2 the rest. The table sets the guide's topics against those Paper 1 sections; we read the guide's topic names against the specification's section names.

SciencePaper 1 sections in the specificationSections the guide namesPaper 2 sections
Biology4.1 Cell biology; 4.2 Organisation; 4.3 Infection and response; 4.4 Bioenergetics4.1, 4.2, 4.3 (3 of 4)4.5 Homeostasis and response; 4.6 Inheritance, variation and evolution; 4.7 Ecology
Chemistry5.1 Atomic structure and the periodic table; 5.2 Bonding, structure, and the properties of matter; 5.3 Quantitative chemistry; 5.4 Chemical changes; 5.5 Energy changes5.1 to 5.5 (5 of 5)5.6 The rate and extent of chemical change; 5.7 Organic chemistry; 5.8 Chemical analysis; 5.9 Chemistry of the atmosphere; 5.10 Using resources
Physics6.1 Energy; 6.2 Electricity; 6.3 Particle model of matter; 6.4 Atomic structure6.1, 6.2, 6.3 (3 of 4)6.5 Forces; 6.6 Waves; 6.7 Magnetism and electromagnetism
All three4 + 5 + 4 = 13 sections3 + 5 + 3 = 11 sections 

Our rule: a Paper 1 section counts as named if the guide's topic list contains a topic with that section's name. On that rule 11 of the 13 Paper 1 sections are named. The two Paper 1 sections whose names are not in the guide's topic list are 4.4 Bioenergetics and 6.4 Atomic structure.

Chemistry Paper 2 carries a sentence that links back to the first year. The specification's description of that paper says: "Questions in Paper 2 may draw on fundamental concepts and principles from Sections 5.1 to 5.3." Those three sections (atomic structure and the periodic table; bonding, structure and the properties of matter; quantitative chemistry) are the first three chemistry topics in the guide's list. The specification adds that GCSE outcomes may build on content typically taught at Key Stage 3, with no expectation that such content is repeated where it has been covered earlier.

Synergy arranges the same ground differently. Its specification lists eight topics, 4.1 to 4.8, and four papers: Papers 1 and 2 both assess topics 4.1 to 4.4 (life and environmental sciences) and Papers 3 and 4 both assess topics 4.5 to 4.8 (physical sciences). We read the guide's four Synergy topics against the specification's sections 4.1 Building blocks, 4.2 Transport over larger distances, 4.5 Building blocks for understanding and 4.6 Interactions over small and large distances.

Synergy paperSpecification topics assessedOf the guide's four topics, those in this paper
Paper 14.1 to 4.44.1 and 4.2
Paper 24.1 to 4.44.1 and 4.2
Paper 34.5 to 4.84.5 and 4.6
Paper 44.5 to 4.84.5 and 4.6

For Papers 2 and 4 the specification says: "This paper assesses most of the analysis and evaluation (AO3) skills, and most of the work on the required practicals, for the topics." The next section counts where those required practicals sit.

Working out where Year 10 begins?

Book a free consultation to talk through Year 10 AQA GCSE Combined Science tutoring for your route and tier.

Book a Free Consultation Message us on WhatsApp

How many of the 21 required practicals sit in topics the guide names?

Both specifications list 21 required practical activities. The Trilogy specification says: "The following practical activities must be carried out by all students taking GCSE Combined Science: Trilogy." Schools must also give AQA a "practical science statement" confirming that each student has completed them.

Our rule: each required practical is printed in the specification's content pages under a numbered section. We recorded that section, the paper it belongs to, and whether the guide names a topic with that section's name. This counts practicals whose specification section is a topic the guide names; it does not label any practical as belonging to Year 10. Trilogy first, with all 21 rows.

PracticalActivity (our paraphrase)SectionPaperSection named by the guide?
RP1Light microscope: observe, draw and label4.1Paper 1Yes
RP2Salt or sugar solution concentrations and plant tissue4.1Paper 1Yes
RP3Qualitative reagents: carbohydrates, lipids and proteins4.2Paper 1Yes
RP4Effect of pH on the rate of reaction of amylase4.2Paper 1Yes
RP5Effect of light intensity on the rate of photosynthesis4.4Paper 1No
RP6Planned investigation: a factor and human reaction time4.5Paper 2No
RP7Population size of a common species in a habitat4.7Paper 2No
RP8Pure, dry sample of a soluble salt5.4Paper 1Yes
RP9Electrolysis of aqueous solutions with inert electrodes5.4Paper 1Yes
RP10Variables that affect temperature changes in reacting solutions5.5Paper 1Yes
RP11Concentration and rates of reaction5.6Paper 2No
RP12Paper chromatography5.8Paper 2No
RP13Analysis and purification of water samples5.10Paper 2No
RP14Specific heat capacity6.1Paper 1Yes
RP15Circuits and the resistance of electrical circuits6.2Paper 1Yes
RP16Circuits and I-V characteristics of circuit elements6.2Paper 1Yes
RP17Measurements to determine densities6.3Paper 1Yes
RP18Force and extension for a spring6.5Paper 2No
RP19Force, mass and acceleration6.5Paper 2No
RP20Observing waves in a ripple tank and in a solid6.6Paper 2No
RP21Infrared radiation absorbed or radiated by a surface6.6Paper 2No
Total21 practicals 12 on Paper 1; 9 on Paper 211 Yes; 10 No

Working: the Paper 1 practicals are RP1 to RP5 (5 in biology), RP8 to RP10 (3 in chemistry) and RP14 to RP17 (4 in physics), 5 + 3 + 4 = 12. The other 9 (RP6, RP7, RP11, RP12, RP13 and RP18 to RP21) sit under Paper 2 sections, and 12 + 9 = 21. Eleven of the 12 Paper 1 practicals fall under a section the guide names; the exception is RP5, under 4.4 Bioenergetics. None of the 9 Paper 2 practicals does. That gives 11 of 21 for Trilogy.

Synergy is counted on its own. Its specification prints the 21 practicals under its numbered topics, so the working is by topic.

Synergy topicPracticals printed under itCountNamed by the guide?
4.1 Building blocksRP1 to RP66Yes
4.2 Transport over larger distancesRP7 to RP104Yes
4.3 Interactions with the environment 0No
4.4 Explaining changeRP11, RP122No
4.5 Building blocks for understanding 0Yes
4.6 Interactions over small and large distancesRP131Yes
4.7 Movement and interactionsRP14 to RP218No
4.8 Guiding Spaceship Earth towards a sustainable future 0No
Total 6 + 4 + 0 + 2 + 0 + 1 + 8 + 0 = 216 + 4 + 0 + 1 = 11

The two routes number their practicals differently, so RP numbers in the two tables are not the same activities. On Synergy, 11 of the 21 sit under the four topics the guide names. The count is 11 on each route by separate working and the two are never added.

Is your child on Trilogy 8464 or Synergy 8465?

91% of our students achieve their desired grades. Book a free consultation to talk through Year 10 AQA GCSE Combined Science tutoring.

Book a Free Consultation Message us on WhatsApp

What Parents Say

DP

Deborah Prior

★★★★★
Confidence and progress

My son was low in confidence after COVID and the gaps in learning were building up. Using this service helped plug those gaps, rebuild confidence, and improve his ability to learn properly again.

NI

Nicola

★★★★★
Amazing tutors!

We arranged maths and English tuition ahead of GCSEs and both tutors were brilliant. My daughter's grades improved, and by results day she achieved two grades higher than in her mock exams.

S

Saifan Khan

★★★★★
Great Teaching and Focused Learning

I attended an English bootcamp with Leading Tuition and the experience was excellent. The teacher gave focused attention to the small group while keeping the lessons interactive and engaging.

What pacing guidance does AQA publish for each route?

For Trilogy, AQA's 8464 teaching resources page lists 48 schemes of work. Going by their titles, that is one scheme for each of the 24 topic sections, in two sets; the second set carries the printed title "Combined Science: Trilogy - Foundation". Each scheme sets out a table with a "Suggested timing (hours)" column against specification references, and AQA describes a scheme as a "flexible medium term plan". We have not totalled those hours. The schemes are written topic by topic, and the 8464 specification's own statement about time is the one quoted at the start: it is "designed to be taken over two years".

Both specifications also carry a statement about starting points. Under "Previous learning and prerequisites" each says: "There are no previous learning requirements." Entry to a course is left to schools and colleges.

For Synergy, AQA publishes a plan that does place units by year, Teaching guide: two teachers, two years. AQA describes it as "a plan for teaching GCSE Combined Science: Synergy from our new draft specification (8465)", based on "two teachers having a total of 4 hours of teaching time per week". The plan dates from that draft specification, so we quote it as AQA's published plan and not as a statement of what schools do.

AQA's Synergy plan splits its units across two years; our Year 11 AQA Combined Science page sets out the second-year rows.

Which first-year Synergy topics do the plan's Year 2 rows link back to?

Every row of the plan has a "Teaching and learning links" cell naming other topics. The plan's nine Year 2 rows carry 27 such entries between them. Our rule: count every entry in those nine cells, then sort each by where the plan itself teaches the topic it names. An entry that names a topic with a Year 1 row counts as naming a Year 1 topic; an entry that names a topic whose only rows are in Year 2 counts as naming a Year 2 topic.

Year 2 row in the planEntries in its links cellNaming a Year 1 topicNaming a Year 2 topic
4.3.3 Preventing, treating and curing diseases22 (Lifestyle and health; Waves)0
4.7.4 The rate and extent of chemical change33 (The periodic table; Chemical quantities; Systems in the human body)0
4.4.1 The Earth’s atmosphere31 (Plants and photosynthesis)2 (Carbon chemistry; Resources of materials and energy)
4.7.5 Atoms into ions and ions into atoms22 (The periodic table; Chemical quantities)0
4.4.2 Ecosystems and biodiversity42 (Waves; Plants and photosynthesis)2 (Carbon chemistry; Resources of materials and energy)
4.8.1 Carbon chemistry53 (The periodic table; Chemical quantities; Structure and bonding)2 (The Earth’s atmosphere; Ecosystems and biodiversity)
4.4.3 Inheritance21 (Cells in animals and plants)1 (Variation and evolution)
4.8.2 Resources of materials and energy41 (The periodic table)3 (The Earth’s atmosphere; Ecosystems and biodiversity; Atoms into ions and ions into atoms)
4.4.4 Variation and evolution202 (Inheritance; The rate and extent of chemical change)
Total (nine rows)2 + 3 + 3 + 2 + 4 + 5 + 2 + 4 + 2 = 272 + 3 + 1 + 2 + 2 + 3 + 1 + 1 + 0 = 150 + 0 + 2 + 0 + 2 + 2 + 1 + 3 + 2 = 12

On that rule, 15 of the 27 entries name a Year 1 topic and 12 name a Year 2 topic, and 15 + 12 = 27. Counted by topic, the periodic table is named in 4 of the nine Year 2 rows (4.7.4, 4.7.5, 4.8.1 and 4.8.2) and chemical quantities in 3 (4.7.4, 4.7.5 and 4.8.1). Waves and plants and photosynthesis are each named in 2 rows, and lifestyle and health, systems in the human body, structure and bonding, and cells in animals and plants in 1 row each. Those figures add to 4 + 3 + 2 + 2 + 1 + 1 + 1 + 1 = 15.

The links also run forward. The plan's Year 1 row for 4.5.2 Chemical quantities lists three topics that the plan teaches in Year 2: atoms into ions and ions into atoms, carbon chemistry, and resources of materials. We read these links only as the plan's own cross-references, not as dependencies; the count shows how often its links column points from later rows to earlier ones.

Planning the second year?

Book a free consultation to talk through AQA GCSE Combined Science tutoring across Year 10 and Year 11.

Book a Free Consultation Message us on WhatsApp

Which exam habits does AQA's own misunderstandings guide ask students to practise?

AQA's guide on common misunderstandings in GCSE science opens with the statement that "Every year, in GCSE science exams, students often misread, misunderstand or misinterpret questions". Its contents list 16 headed sections, with the page where each starts.

SectionPageSectionPage
Box-ticking6'Evaluate' questions20
Making connections7Questions in unfamiliar contexts23
Completing the sentence8Extended response questions26
Repeating information10Physics equation recall29
Use of language and when spelling matters12Not using the equation or numbers given30
Contradictory answers14Common calculation mistakes31
Misreading the question16Rounding numbers33
'Explain' questions18Graphs34

The first section sets the tone: "Only tick as many boxes as the question asks for." The guide gives the reason in the same section: if a question asks for two answers and a student ticks three, one wrong answer cancels one correct answer. The guide presents the sections as ways to read and answer questions.

Choosing between Foundation and Higher?

Book a free consultation to talk through Year 10 AQA GCSE Combined Science tutoring at either tier.

Book a Free Consultation Message us on WhatsApp

What do Foundation and Higher mean for a Year 10 student?

The Trilogy specification states: "The qualification will be graded on a 17-point scale: 1–1 to 9–9 – where 9–9 is the best grade." A student taking Foundation Tier assessments is awarded a grade in the range 1–1 to 5–5. A student taking Higher Tier assessments is awarded a grade in the range 4–4 to 9–9, and a Higher Tier student who just misses 4–4 is awarded an allowed grade 4–3. The tier-specific pages for Foundation AQA GCSE Combined Science and Higher AQA GCSE Combined Science cover each tier on its own.

AQA's tiering guide for the GCSE sciences lists among the challenges it describes that students sit the same tier in all the exam papers for a specification, so a Combined Science student cannot take a mixture of Foundation and Higher papers. It says "perform consistently well across all six papers" matters for Trilogy students, and that grades are not allocated to individual papers: the total mark across all the papers is what counts. It also says: "Many schools and colleges sit Paper 1 as a mock in December/January and then Paper 2 in February/March."

The guide lists nine questions as key indicators for a tier decision: performance on the common questions in mock exams; comfort with maths questions in a scientific context; understanding of the required practicals, the science behind them and the working scientifically elements; handling science in an unfamiliar context; resilience on challenging questions from the start of a paper; understanding of the basic concepts and phenomena; graphing and data interpretation; precise scientific language; and writing a coherent, logical and structured extended answer.

For a student on the separate sciences instead, AQA's end-of-Year-10 guide says its Trilogy set includes the three separate sciences, and our Year 10 pages for Year 10 AQA GCSE Biology, Year 10 AQA GCSE Chemistry and Year 10 AQA GCSE Physics cover those qualifications.

Frequently Asked Questions About Year 10 AQA GCSE Combined Science

Which topics does AQA's end-of-Year-10 guide name for Trilogy?

AQA's guide lists 11 Trilogy topics by our count: cell biology, organisation, and infection and response in biology; atomic structure, bonding, quantitative chemistry, chemical change and energy changes in chemistry; and energy, electricity and particle model of matter in physics. The guide is dated April 2017. Its Synergy list has 4 topics: building blocks, transport over large distances, building blocks for understanding, and interactions over small and large distances.

How many Trilogy required practicals sit in topics the guide names?

By our count, 11 of the 21 Trilogy required practicals sit under a specification section the guide names. They are RP1 and RP2 (section 4.1), RP3 and RP4 (4.2), RP8 and RP9 (5.4), RP10 (5.5), RP14 (6.1), RP15 and RP16 (6.2) and RP17 (6.3). RP5 is on Paper 1 under 4.4 Bioenergetics, a section name that is not in the guide's topic list, and the other 9 sit under Paper 2 sections.

Does AQA split the Trilogy content between Year 10 and Year 11?

The Trilogy specification says it is designed to be taken over two years, and AQA's 8464 teaching resources list 48 schemes of work written topic by topic, 24 topic sections in two sets. AQA's Synergy plan, Teaching guide: two teachers, two years, puts Units 1, 2, 5 and 6 in Year 1 only, Units 3 and 7 across both years, and Units 4 and 8 in Year 2.

What do the Synergy plan's Year 2 rows link back to?

Our count of the nine Year 2 rows in AQA's Synergy plan finds 27 entries in their Teaching and learning links cells. 15 of them name a topic the plan teaches in Year 1, and 12 name a Year 2 topic. The periodic table is named in 4 of the nine rows and chemical quantities in 3. The plan dates from AQA's draft Synergy specification, so it is quoted as AQA's published plan.

Can first-year chemistry be drawn on in Chemistry Paper 2?

AQA's Trilogy specification says: "Questions in Paper 2 may draw on fundamental concepts and principles from Sections 5.1 to 5.3." Those are atomic structure and the periodic table (5.1), bonding, structure and the properties of matter (5.2) and quantitative chemistry (5.3), three of the five chemistry topics in AQA's end-of-Year-10 guide. Chemistry Paper 2 covers sections 5.6 to 5.10, from the rate and extent of chemical change to using resources.

What grades can each Trilogy tier award?

AQA's specification grades Trilogy on a 17-point scale from 1–1 to 9–9. Foundation Tier awards 1–1 to 5–5, and Higher Tier awards 4–4 to 9–9, with an allowed grade 4–3 for a Higher Tier student who just misses 4–4. AQA's tiering guide says students sit the same tier in all the exam papers for the specification, so a student cannot mix Foundation and Higher papers.

How long are the papers in AQA's end-of-Year-10 guide?

AQA's guide gives 30 minutes for each Trilogy paper and 45 minutes for each Synergy paper, and says students could sit them in separate sessions or in one 90 minute period. Each test is available at Foundation and Higher Tier, and the periodic table and physics equation sheet are in the same folders as the papers. The guide is dated April 2017.

See AQA's own pages for each route: AQA's Trilogy 8464 specification page and AQA's Synergy 8465 specification page.

Book Year 10 AQA GCSE Combined Science Tutoring

Book a free consultation to talk through Year 10 AQA GCSE Combined Science for Trilogy 8464 or Synergy 8465.

Leading Tuition is rated 4.8 out of 5 on Trustpilot from 59 reviews, read on 3 October 2026.

Book a Free Consultation
Message us on WhatsApp